DJohns' 2015 Cannondale SuperSIx Evo HiMod

Who are you (no off-topic talk please)

Moderators: MrCurrieinahurry, maxim809, Moderator Team

Post Reply
Djohns
Posts: 26
Joined: Mon Nov 07, 2016 3:58 am

by Djohns

This build is been for a while now; I didn't post this here not until i have decided to try Weight Weenie build. There are some few Weight Weenie components that i had installed in this rig, originally the build weighs around 6.35kg but right after injecting the WW components it's now down to 5.90kg as pictured w/computer. Still have some plenty of room to lower down the weight. I'll just share here now what i have in this build. Hope you like it, below are the list of the components.

Frame: 2015 Cannondale SuperSix Evo Himod, 50cm
Fork: 2015 Cannondale SuperSix Evo Himod
Expander: Extralite Ultrastar 3
Head Cap: Tune A Head Cap
Handle Bar: Deda Superleggera, 42cm
Bartape: Lizard DSP, 1.8mm
Stem: Extralite Hyperstem, 110mm -12deg
Seatpost: Deda Superleggero, 27.2mm
Saddle: Selle Italia SLR Kit Carbonio Flow
Wheelset: Mavic Carbone 40T
Tires: Continental Gatorskin, 22mm
Skewers: Extralite Skewers
Cable & Housing: Jagwire Elite
Brakeset: Sram Redd 22 w/ Swisstop Flash Pro pads
Shifters & Derailleurs: Sram Red 22
Chaincatcher: Carbonice
Crank Arm: Sram Red 22
Chainrings: Carbon-Ti X-Ring Al/Ca EVO 50/34 (w/ 11-29 Red22 Sprocket) w/ Carbon-Ti Chainring Bolts
Chain: YBN SLA 110
Pedals: Look Keo Blade 2 Ti

BLACK & GREY has always been the center of my liking for colors
Image

Image

Image

Image

Image

Image
Last edited by Djohns on Mon Feb 27, 2017 1:22 am, edited 3 times in total.

User avatar
ryanw
in the industry
Posts: 2284
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Nice build! Love the colourway.

How are you finding the stem, looking at getting one myself.
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
jbaillie
Posts: 684
Joined: Thu Nov 01, 2012 4:17 pm

by jbaillie

Beautiful. How do you like the chainrings?

Djohns
Posts: 26
Joined: Mon Nov 07, 2016 3:58 am

by Djohns

ryanw wrote:Nice build! Love the colourway.

How are you finding the stem, looking at getting one myself.

Thanks!

Ordered this one because i know it would look better on my ride. But the feel, i think i love the prev stem that i had debadged on this one, i just simply love the ride with the enve stem, they feel much stiffer than the extralite.
Last edited by Djohns on Tue Jan 03, 2017 3:16 pm, edited 2 times in total.

Djohns
Posts: 26
Joined: Mon Nov 07, 2016 3:58 am

by Djohns

jbaillie wrote:Beautiful. How do you like the chainrings?

Thanks!

Very good. My only issue is you need to shift it like a pro. The chain drops if you cross shift the rings. Not like my stock red22 ring you just dont care which side of the rings you are shifting the chain just dont drop..

User avatar
godzuki26
Posts: 1314
Joined: Sat Jul 28, 2012 11:31 pm

by godzuki26

The Tune Würger Skyline 2.0 Seat Clamp in 30.8 was a perfect fit on my wife's 2015 HImod Cannondale Evo. I remember you asking me about it. It should work fine with your 27.2 mm seatpost.
:arrow: BH Ultralight
:arrow: Litespeed Ghisallo
:arrow: Scott Addict Singlespeed
_________________

ImageCannondale Evo HiMod
ImageFelt AR FRD

Djohns
Posts: 26
Joined: Mon Nov 07, 2016 3:58 am

by Djohns

godzuki26 wrote:The Tune Würger Skyline 2.0 Seat Clamp in 30.8 was a perfect fit on my wife's 2015 HImod Cannondale Evo. I remember you asking me about it. It should work fine with your 27.2 mm seatpost.

Thanks! Coz i emailed tune re the 30.8 if it will fit and they recommend to buy the clamp with 30mm outside diameter as calipered.

User avatar
godzuki26
Posts: 1314
Joined: Sat Jul 28, 2012 11:31 pm

by godzuki26

Here are some pics on my wife's bike with the 30.8mm clamp and 27.2mm Daedelus seatpost. It fits like a glove. BTW I was just getting into cabling wifey's bike. I did not know of a clean way to run the cables until I came across your pics. The front of your bike looks outstanding. The cables are set up perfectly :thumbup:

Image

Image
:arrow: BH Ultralight
:arrow: Litespeed Ghisallo
:arrow: Scott Addict Singlespeed
_________________

ImageCannondale Evo HiMod
ImageFelt AR FRD

micro553
Posts: 120
Joined: Sun Jan 24, 2016 2:07 pm

by micro553

Nice bike.

Can u tell med BB to Saddle messurment and saddletip to middle of bar.

I really like the colors.

Djohns
Posts: 26
Joined: Mon Nov 07, 2016 3:58 am

by Djohns

godzuki26 wrote:Here are some pics on my wife's bike with the 30.8mm clamp and 27.2mm Daedelus seatpost. It fits like a glove. BTW I was just getting into cabling wifey's bike. I did not know of a clean way to run the cables until I came across your pics. The front of your bike looks outstanding. The cables are set up perfectly :thumbup:

Thanks man!

I thought you clamped it at the very tip of the seat tube. il check if it will work on my 31mm clamp, nice idea there.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Djohns
Posts: 26
Joined: Mon Nov 07, 2016 3:58 am

by Djohns

micro553 wrote:Nice bike.

Can u tell med BB to Saddle messurment and saddletip to middle of bar.

I really like the colors.


Thanks.

Il try to measure those distances.. il get back to you right away.

Post Reply