Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Wed Dec 13, 2017 9:44 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 20 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Sat Dec 17, 2016 6:39 am 
Offline

Joined: Tue Oct 29, 2013 3:40 am
Posts: 69
Location: Melbourn - 'Straya
Been a long time lurker here so thought it was about time I posted up my new build.

For the past few years I have been racing full time but was forced to retire this year due to some long-term medical issues. This meant that for the first time in a long time I had to go out and get myself a bike, and was able to build it exactly as I wanted it!

I knew I wanted Di2, mainly because its hassle free and I couldn't be bothered dealing with cable stretch/wear (not a big deal I know). I knew I wanted a powermeter to keep track of my riding and for my own interest too. I knew I wanted something I was happy with visually and lastly I wanted a very clean looking build, after seeing so many potentially amazing builds let down by having cables everywhere, I wanted something clean.

I didn't have a set budget for this but all the parts where purchased as good deals so it came out much, much cheaper than expected based off the build list.

I was originally keen on getting an Evo frameset as I have always liked how they ride and their lines (rode one briefly in 2015), but when this frame came up for an absolute steal I couldn't turn it down. I do love the look of the Izalco's and knew they where great bikes and for the price I couldn't pass it up. Over the past few months I have been getting all the parts together as deals came up and bits became available.

I decided to get some wheels built up (with some advice from dudemanppl) and ordered some LB45 rims to be laced to White Industries T11 hubs with Lasers. Gloss rims and silver hubs/spokes/nipples. The hubs took much longer than expected to arrive and pushed the built back a few weeks.

I picked the complete bike up last week. It was built by Dan @ Shifter Bikes in Melbourne, he has been doing some amazing work and does super clean Di2 installs. The Di2 junction is hidden and some magic has been worked to hide all except one of the cables, which enters the downtube. I couldn't be happier with how the build looks and the only part I will be changing is getting a 'slam that stem' headset bearing cover, as well as the bar tape to fizik as this is delaminating behind the hoods already.

The wheels turned out absolutely amazingly, they look unbelievable in the sun.

Build list below:
Attachment:
Build List.jpg
Build List.jpg [ 85.53 KiB | Viewed 3157 times ]


After a weeks riding I can happily say it is the best bike I have ridden, over the past few years I have been lucky enough to ride some seriously nice bikes but this takes the cake. The veloflex tyres on these wheels with the latex tubes are a delight. I'm currently running 75f/80r and would even go 5 psi lower, they are just so smooth and no hint of squirming or bottoming out the rim resulting in a pinch flat. The bike is everything I hoped for.

I had initially been using the LB pads on the wheels but after going to the hills last week they started to squeal so where stopped to Wiggle lifline pads whilst I wait on some Giant pads (recommended by dudemanppl). The Wiggle pads have been working well the past few rides although I haven't been out to the hills since.

Finally here is a few pics of the built bike (some photos show Fizik Antares, this has since been swapped for a toupe).
Image
Image
Image
Image

_________________
http://www.instagram.com/ostevenson/


Top
   
PostPosted: Sat Dec 17, 2016 7:09 am 
Offline

Joined: Thu Feb 12, 2015 9:40 am
Posts: 771
Location: Pom living in Australia
Lovely build, like the neat cabling. Where did you hide the DI2 box.?

Sent from my SM-G930F using Tapatalk


Top
   
Posted: Sat Dec 17, 2016 7:09 am 


Top
   
 
PostPosted: Sat Dec 17, 2016 8:41 am 
Offline

Joined: Sun Jun 24, 2012 11:02 am
Posts: 406
Location: Danmark
That's nice - Shifter bikes really know how to build finish a bike! :thumbup:

_________________
Tumblr
Instagram
Kaptajn Webstore


Top
   
PostPosted: Sat Dec 17, 2016 9:08 am 
Offline

Joined: Sat Feb 20, 2016 12:32 pm
Posts: 48
That looks immaculate, congratulations.


Top
   
PostPosted: Sat Dec 17, 2016 10:07 am 
Offline

Joined: Wed Nov 11, 2015 10:31 am
Posts: 97
Nice bike, would be nice if the rear brake cable were internal also


Top
   
PostPosted: Sat Dec 17, 2016 5:44 pm 
Offline

Joined: Sat Nov 14, 2015 10:10 am
Posts: 230
great looking bike, with lot of potential for saving weight (but this is not so important).
i although love those frames, especially in terms of geometry and aesthetics.
i am not shure about white saddle/bartape, maybe black/black would go better with it..


Top
   
PostPosted: Sat Dec 17, 2016 6:00 pm 
Offline

Joined: Mon May 22, 2006 11:34 am
Posts: 478
Location: Dubai, UAE
Now that's a good looking bike! Love it.


Top
   
PostPosted: Sun Dec 18, 2016 1:26 am 
Offline

Joined: Fri Feb 22, 2013 5:09 am
Posts: 620
Yeaaaaaaaaaaaaaaaa booooooiiiiiiii got that double shoutout. Very smart build, nothing I would change.


Top
   
PostPosted: Sun Dec 18, 2016 2:54 am 
Offline

Joined: Wed Nov 11, 2015 9:36 am
Posts: 100
Location: Yorkshire, UK / Bangkok, Thailand
Fantastic looking bike!


Top
   
PostPosted: Sun Dec 18, 2016 3:59 am 
Online

Joined: Wed Sep 12, 2012 9:00 pm
Posts: 581
Location: Az USA
Damn, pure hotness right there! I always like to see the stem parallel the top tube, just looks very clean


Top
   
PostPosted: Fri Jan 20, 2017 11:19 pm 
Offline

Joined: Tue Oct 29, 2013 3:40 am
Posts: 69
Location: Melbourn - 'Straya
Sorry for the slow reply everyone!

KCookie wrote:
Lovely build, like the neat cabling. Where did you hide the DI2 box.?

Dan @ Shifter keeps his cards pretty close to his chest with regards to his internal di2 work so in keeping with that I'll have to keep it under wraps. You might be able to figure it out, takes 1 minute to access the junction for charging/adjustment. I just charge the battery once a month to be safe.
CaptainP wrote:
That's nice - Shifter bikes really know how to build finish a bike! :thumbup:

He sure does!
reedplayer wrote:
great looking bike, with lot of potential for saving weight (but this is not so important).
i although love those frames, especially in terms of geometry and aesthetics.
i am not shure about white saddle/bartape, maybe black/black would go better with it..

Thanks reedplayer, low weight was not the main goal of the build but was certainly considered. There really isn't any parts I would change, other than swapping the bars for 38's which as far as I know zipp don't make in this model. Can see where your coming from with the tape/saddle colour but I am very happy with them in white, in person the spokes and hubs pick up the sun and the white just works. I'm also not a fan of all black bikes.
dudemanppl wrote:
Yeaaaaaaaaaaaaaaaa booooooiiiiiiii got that double shoutout. Very smart build, nothing I would change.

Cheers! Wrapt with how it turned out, as I said to you, I took inspiration from your build(s) when putting it together.

_________________
http://www.instagram.com/ostevenson/


Top
   
PostPosted: Sat Jan 21, 2017 12:13 am 
Offline

Joined: Thu Jan 22, 2015 6:58 pm
Posts: 810
Location: Northamptonshire UK
Awesome build, I'd ride the sh*t out of that. All the proportions are spot on. I must say I usually go for all black wheels but yours have changed my mind completely!! Love it!!!!


Top
   
PostPosted: Sat Jan 21, 2017 4:31 am 
Offline

Joined: Fri Feb 22, 2013 5:09 am
Posts: 620
They do make the 38s in that bend, but it would be carbon. They're also pretty rare now since they're now discontinued. #NARROWGANGORDONTBANG


Top
   
PostPosted: Sat Jan 21, 2017 4:57 am 
Offline
User avatar

Joined: Wed Sep 29, 2010 4:25 pm
Posts: 146
Location: MA
Outstanding looking bike. Enjoy!

_________________
The Stable http://www.flickr.com/photos/121194764@N07/albums

622 SLX | Axiom SL | Mudhoney SL (retired) | S Works Crux | Fondriest Carbon Magister | Fat CAAD 1


Top
   
Posted: Sat Jan 21, 2017 4:57 am 


Top
   
 
PostPosted: Sun Jan 29, 2017 12:13 pm 
Offline

Joined: Tue Oct 29, 2013 3:40 am
Posts: 69
Location: Melbourn - 'Straya
burglarboycie wrote:
Awesome build, I'd ride the sh*t out of that. All the proportions are spot on. I must say I usually go for all black wheels but yours have changed my mind completely!! Love it!!!!

Thanks! After seeing dudemanppl's wheels with the silver spokes I had my mind set on the look of them!

dudemanppl wrote:
They do make the 38s in that bend, but it would be carbon. They're also pretty rare now since they're now discontinued. #NARROWGANGORDONTBANG

I knew they used to but I've always used alloy bars and just prefer them for piece of mind mainly (that and I'm not too fussed about the extra 50g). If only they made them in alloy 38's!

jrobart wrote:
Outstanding looking bike. Enjoy!

Thanks! Have been loving it!

_________________
http://www.instagram.com/ostevenson/


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 20 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Focus Izalco Max

[ Go to page: 1 2 3 ]

in Introduce Yourself / Gallery - Please use metric weights.

muffinman

38

5436

Sun Oct 22, 2017 9:37 pm

themidge View the latest post

There are no new unread posts for this topic. focus izalco max ultegra di2 -

in Introduce Yourself / Gallery - Please use metric weights.

weptunus

3

1471

Sat May 27, 2017 7:17 pm

weptunus View the latest post

There are no new unread posts for this topic. Unpainted Focus Izalco Max?

in Road

iamalex

14

1428

Fri Sep 22, 2017 7:09 pm

prendrefeu View the latest post

There are no new unread posts for this topic. Attachment(s) Focus Izalco Max Disc...New Wheels,

[ Go to page: 1 2 3 4 ]

in Introduce Yourself / Gallery - Please use metric weights.

Squashednuts

48

5600

Wed Oct 18, 2017 7:33 am

oshkikimi View the latest post

There are no new unread posts for this topic. Focus Izalco Max 2017 build

in Introduce Yourself / Gallery - Please use metric weights.

2phat2slow

0

763

Tue Oct 17, 2017 1:59 am

2phat2slow View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: KarlC, Matija and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited