CAAD 12 Di2
Moderators: MrCurrieinahurry, maxim809, Moderator Team
First time poster...be gentle!
Here is my CAAD 12, built from a frame set. Hardly a weenie at 7.7kgs but it's fast!
Plans for a hylix seatpost, SIL2's and sram Red which will hopefully get it closer to 7kg
CAAD 12 54cm
Ultegra Di2 6870 50/34 11/32
Zipp 303 CC
Vitoria Corsa Evo 3 tyres
Cannondale C3 stem
Deda superleggera carbon bars
Cannondale C2 post
Selle Italia SLR super flow
Speedplay chromoly
Bontrager rxl Carbon cages
Thanks for looking..
Sent from my iPhone using Tapatalk
Here is my CAAD 12, built from a frame set. Hardly a weenie at 7.7kgs but it's fast!
Plans for a hylix seatpost, SIL2's and sram Red which will hopefully get it closer to 7kg
CAAD 12 54cm
Ultegra Di2 6870 50/34 11/32
Zipp 303 CC
Vitoria Corsa Evo 3 tyres
Cannondale C3 stem
Deda superleggera carbon bars
Cannondale C2 post
Selle Italia SLR super flow
Speedplay chromoly
Bontrager rxl Carbon cages
Thanks for looking..
Sent from my iPhone using Tapatalk
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Looks great. I have the same frame and planning Di2 as well. It's a shame the photo doesn't do the colour justice...
-
- Posts: 988
- Joined: Thu Jan 22, 2015 6:58 pm
- Location: Northamptonshire UK
Great looking bike, I'm a big fan of the CAAD 12 frameset. SiSl cranks and spidering will really finish it off nicely!
that is neat and tidy...pretty awesome looking too! my last CAAD was a CAAD 8 the bare metal one...loved it to bits...amazing what cannondale does with the CAADs! congrats!
Current
Festka Scala | Pego Respo | English V3 | Colnago EPS Erik Zabel | Colnago V4rs
Incoming
Festka Scala | Pego Respo | English V3 | Colnago EPS Erik Zabel | Colnago V4rs
Incoming
bomber wrote:Looks great. I have the same frame and planning Di2 as well. It's a shame the photo doesn't do the colour justice...
Agree - the iPhone struggles with this colour - makes it look orange when in fact it's red!
Sent from my iPhone using Tapatalk
tomee wrote:nice.
with the smaller diameter seatpost, how have you installed the di2 battery?
Thanks for the feedback.,
Di2 battery does fit however not with the official rubber bung - I just wrapped it in some old inner tube and taped it in.
The cable routing was the the difficult part, especially through the bb and the rear stay.
I'm yet to finish off the install off as I require the cable exit grommet for the rear stay and the blank plugs for the mechanical cable entry points. These are proving difficult to source..
Sent from my iPhone using Tapatalk
rmr40 wrote:tomee wrote:nice.
with the smaller diameter seatpost, how have you installed the di2 battery?
Thanks for the feedback.,
Di2 battery does fit however not with the official rubber bung - I just wrapped it in some old inner tube and taped it in.
The cable routing was the the difficult part, especially through the bb and the rear stay.
I'm yet to finish off the install off as I require the cable exit grommet for the rear stay and the blank plugs for the mechanical cable entry points. These are proving difficult to source..
Sent from my iPhone using Tapatalk
im building a caad12 disc and the di2 through the rear was the easy part.
Trying to feed the hydraulic cable with a bb30a to 24mm adaptor is worse
-
- Posts: 22
- Joined: Mon Apr 18, 2016 7:53 am
Where did you get those blank plugs for the mechanical entry?
Goldsprint wrote:Where did you get those blank plugs for the mechanical entry?
I just used some generic rubber grommet plugs from halfords and stuck them in. I'm not entirely sure that Cannondale even offer an official part for this...? I searched everywhere..
Thepants wrote:Hi, looks fantastic, can you advise where you took the cable to the front mech? Did you go out the on the cable router or is there another way? Thanks
There is a small hole on the back of the seat tube, close to the FD that is specifically for a di2 cable..
Sent from my iPhone using Tapatalk
Hi guys, found these, blank BB Bing & blank grommet for the cable entry's.
Cheers
http://www.shapeways.com/product/EHGMA3 ... cable-plug
Cheers
http://www.shapeways.com/product/EHGMA3 ... cable-plug
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- willowwonka
- Posts: 61
- Joined: Mon Oct 24, 2016 9:12 pm
- Location: West Midlands, UK
Lovely looking CAAD12, haven't seen many fitted with di2 yet. I also haven't seen one in that colour in person yet, really cool.
I'm on the lookout for a frameset now as I dented the top tube on my CAAD10 the other week
I'm on the lookout for a frameset now as I dented the top tube on my CAAD10 the other week
- CANYON KATUSHA TEAM ULTIMATE SLX SUMMER RIG.
- CANNONDALE CAAD10 ANNODISED WINTER SLOG.
- CANNONDALE CAAD10 ANNODISED WINTER SLOG.