Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Dec 16, 2017 8:53 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 123 posts ]  Go to page 1 2 3 4 59 Next
Author Message
 Post subject: Kayrehn Fuji SL 1.1 <5kg
PostPosted: Tue Jul 05, 2016 1:34 pm 
Offline
User avatar

Joined: Thu Mar 24, 2011 6:06 pm
Posts: 921
Goal - Sub 5kg, under 7.5k usd (which works out to 10k in my local currency)

Was a choice between this and the Ax lightness vial but even the R version of the latter cannot go close to my current Madone H1 geometry, and with the silly low price of the Fuji SL the choice is clear.

Things aren't off to a promising start though
Image

That weight is for a size 54 without bottle cage screws, seat collar, headset and the cable guide piece with straws for shift cables. Was hoping to get under 750g and now I'm almost 20g off in my calculations.

Image

(Update)
Final Build list with weights
Fuji SL 1.1 769g
Fuji SL 1.1 fork uncut 280g
Kalloy stem 130mm 108g
Black titanium bolts 11g
Haerocarbon RR145 SL bars 38cm c-to-c 158g
Sram Etap shifters 265g
Sram Etap Wifli rear derailleur (No pulley wheels) 219g
Sram Etap front derailleur 135g
Sram Etap batteries 49g
EE brakes 174g
Corima Cork pads 8g
Extralite Cybermax 32 tubular wheels 898g
Sram XG 1190 (11-26t) cassette 158g
Vittoria G+ Corsa Speed tubular 410g
FFWD valve extenders 20mm 5g
Sram red Etap cranks 172.5mm BB30 365g
Fiberlyte 52-36 chain Rings 85g
Fouriers Chainring bolts 13g
Look Keo Blade 2 Ti pedals 192g
Carbonworks bottle cages 13g
Berk Combo seatpost-saddle combo 166g
F1 ceramic PF30 bottom bracket 83g
KMC X11 SL DLC chain 218g
Carbonice Eva 2.0 seat collar 6g
Fsa headset 47g
Powercordz brake cables 7g
Schmolke ahead plug 6g
Deda bar end plugs (Drilled out) 2g
Fibrelyte tri-spoke derailleur pulleys 7g
J&L Ebay lock skewers 28g
Fizik bar tape 34g
Mastik one tubular glue used 20g
Raceware Garmin mount (510 version) 11g
Garmin cadence sensor 10g
Skunkworks Etap climbing blips 3g
Ebay rubber tape for bar tape 4g

Stuff I didn't weigh accurately - Cut fork, small bits of sugru to cover port holes, protective tape at BB area

Total rideable weight with pedals - 4.96kg

_________________
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15

Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji


Last edited by Kayrehn on Tue Jul 05, 2016 1:34 pm, edited 3 times in total.

Top
   
PostPosted: Tue Jul 05, 2016 3:59 pm 
Offline
User avatar

Joined: Sun Aug 03, 2014 1:00 pm
Posts: 140
I'm really looking forward to this! Subscribed.


Top
   
Posted: Tue Jul 05, 2016 3:59 pm 


Top
   
 
PostPosted: Tue Jul 05, 2016 4:23 pm 
Offline

Joined: Fri Jun 12, 2015 6:21 pm
Posts: 340
Subscribed. Though 10k can't exactly be classified as budget leh

Sent from my SM-G920I using Tapatalk

_________________
My Tarmac SL3 http://weightweenies.starbike.com/forum/viewtopic.php?t=136991


Top
   
PostPosted: Tue Jul 05, 2016 5:04 pm 
Offline
User avatar

Joined: Thu Mar 24, 2011 6:06 pm
Posts: 921
It is a budget ww build if I can't throw on a THM crank

Other parts of the frame...

An integrated chain catcher, light enough for me to keep it.
Image

Headset is pretty light too, not sure if I can get it lighter even with Extralite headset so it's staying.
Image

This is definitely going out...
Image

This solid piece goes onto the bottom to replace the cable guide if you're using Di2 - will it be ok to leave it out since I'm using a PF30 BB shell?
Image

_________________
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15

Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji


Top
   
PostPosted: Tue Jul 05, 2016 10:47 pm 
Offline

Joined: Fri Mar 12, 2010 10:49 pm
Posts: 30
Uh, why Di2?
I thought this was a weightweenie+low budget build.
Screams SRAM RED 22


Top
   
PostPosted: Tue Jul 05, 2016 11:40 pm 
Offline
User avatar

Joined: Mon Feb 19, 2007 3:44 am
Posts: 2263
Location: Canada
junchen wrote:
Subscribed. Though 10k can't exactly be classified as budget


+ 1000 :lol:

Louis :)


Top
   
PostPosted: Wed Jul 06, 2016 12:20 am 
Offline

Joined: Thu Jul 19, 2012 6:09 pm
Posts: 1110
Location: Loveland, CO
I have a Fuji Transonic and the included headset weighs 132g. Are the headset you have made a aluminum? How can there be such a big difference in weight between headsets? I wish to know if I could upgrade to the lighter one. Do you mind posting the headset measurements for me (i.e. ID and OD)? Btw my fork doesn't use a bearing crown. I don't know if the SL is the same way. Thanks.


Top
   
PostPosted: Wed Jul 06, 2016 2:56 am 
Offline

Joined: Tue Mar 18, 2014 10:13 pm
Posts: 473
Location: Great Southern Land
Subscribed also. Thinking of starting on a similar project but unsure whether to use the Fuji or an Argon 18 Gallium Pro, similar weights & $'s. If this comes in under the 5kg target and on budget I'll pumped for you :)

_________________
Ahhh, coffee & carbon


Top
   
PostPosted: Wed Jul 06, 2016 3:04 am 
Offline
User avatar

Joined: Sat Mar 14, 2009 6:08 am
Posts: 8408
Location: Geelong
3% off expected weight surely isn't the end of the world? Do rate Fiji's though, this one should be good.

And I can't wait to share my budget Lamborghini build. $10k 'budgetweenie' :lol:

_________________
VeloKicks
The Gram
The Men of Steel


Top
   
PostPosted: Wed Jul 06, 2016 6:33 am 
Offline
User avatar

Joined: Thu Mar 24, 2011 6:06 pm
Posts: 921
Tinea Pedis wrote:
3% off expected weight surely isn't the end of the world? Do rate Fiji's though, this one should be good.

And I can't wait to share my budget Lamborghini build. $10k 'budgetweenie'

Running a tight ship trying to get the weight within limit. One issue is that almost all the parts have been ordered so to be thrown off by 20g can be difficult. Wouldn't be the end of the world (or build) if it goes over 5kg but the fun is in the challenge.

Anyway, 10k is in my currency; 7.5k usd is tight if you wanna get top end stuff.

Ill try to measure the bearing cup OD. Extralite Ultratop and Ultrabottom were options I considered if they were heavy. Madcow also gave the suggestion of KCNC ones.

_________________
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15

Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji


Top
   
PostPosted: Wed Jul 06, 2016 7:26 am 
Offline

Joined: Fri Feb 22, 2013 5:09 am
Posts: 621
My friend build up his Izalco Max to 5.39kg and it only cost 2700 USD... I hope it doesnt take 5000 dollars to lose 390 grams.


Top
   
PostPosted: Wed Jul 06, 2016 11:14 am 
Offline
User avatar

Joined: Sun Aug 03, 2014 1:00 pm
Posts: 140
dudemanppl: I think it is a bit unfair to compare it with the Izalco Max your friend built, since from what I see by googling an Izalco Max frame costs already about 3000Eur new + Red would be about 1400Eur extra. I assume your friend bought a used frame and has a big spare parts bin?


Top
   
PostPosted: Wed Jul 06, 2016 5:19 pm 
Offline

Joined: Fri Feb 22, 2013 5:09 am
Posts: 621
Nope, that is the complete purchased price. Nothing from the parts bin.


Top
   
PostPosted: Wed Jul 06, 2016 5:21 pm 
Offline
User avatar

Joined: Sun Aug 03, 2014 1:00 pm
Posts: 140
OK, but I guess then it must be many used parts. My point is that 5000 dollars is not the price of losing 390gr, but of losing 390gr and having new instead of used parts. Anyways, not important :D looking forward on how this turns out.


Top
   
Posted: Wed Jul 06, 2016 5:21 pm 


Top
   
 
PostPosted: Wed Jul 06, 2016 5:59 pm 
Offline
User avatar

Joined: Thu Mar 24, 2011 6:06 pm
Posts: 921
This contributes to the weight and cost of the project, but it is also the motivation to start the build.
Image

_________________
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15

Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 123 posts ]  Go to page 1 2 3 4 59 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Fuji SST 1.0 Aero set up

in Road

jchehan

1

616

Mon Feb 27, 2017 9:49 pm

Allen254 View the latest post

There are no new unread posts for this topic. 2018 Fuji SL

[ Go to page: 1 2 3 ]

in Road

Roni1

32

6447

Mon Nov 27, 2017 4:44 pm

Hamfist View the latest post

There are no new unread posts for this topic. Allen254 Fuji

in Introduce Yourself / Gallery - Please use metric weights.

Allen254

5

1023

Wed Jan 11, 2017 10:00 pm

reedplayer View the latest post

There are no new unread posts for this topic. 2018 FUJI SL 1.1 54cm

[ Go to page: 1 2 ]

in Introduce Yourself / Gallery - Please use metric weights.

Drpoomanchu

15

5725

Thu Dec 07, 2017 3:26 am

Drpoomanchu View the latest post

There are no new unread posts for this topic. 2017 Fuji SL Elite value?

in Road

frknvgn

2

679

Thu Sep 07, 2017 8:50 am

Squashednuts View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: DOUG, Google Adsense [Bot] and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited