Scott addict Single Speed

Who are you (no off-topic talk please)

Moderator: Moderator Team

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

Image
Image
Image
Image
Image



Sent from my iPhone using Tapatalk
Last edited by Arfer01 on Mon May 15, 2017 4:55 pm, edited 1 time in total.

KCookie
Posts: 898
Joined: Thu Feb 12, 2015 9:40 am
Location: Pom living in Australia

by KCookie

Have you a list of parts your going to use to go sub 5. Please show and tell. :)

by Weenie


Johnny Rad
Posts: 1826
Joined: Fri Feb 17, 2006 6:22 am
Location: Zion

by Johnny Rad

That was one of the best paint schemes on that gen of Addict. I say was...

At 350g, I would've guessed there'd be a lot more steerer to trim.

Very eager to see where this goes.

:popcorn:

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

Just want to re-iterate before anyone gets let down this is going to be a SINGLE SPEED (SS).

I have done the 'money no object' 5.5kg fully geared road bike, it was cool but this project is just for fun and pure weenie. Attached previous weenie project for reference (sold)

Image


Sent from my iPhone using Tapatalk

BmanX
Posts: 3844
Joined: Thu Nov 10, 2005 5:31 pm

by BmanX

Look forward to seeing what you do.
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5960g/13.13 lbs

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

Yup going to be shimano to start with

Image
Image
Image


Sent from my iPhone using Tapatalk

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

I did have a parts list but lost it like an ametur, it came out just under 5kg, guess you guys will just have to see the spec as it goes on


Sent from my iPhone using Tapatalk

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

Stock headset vs without conical and slimmer compression ring, bearings are a little rough from previous owner so will still most likely still replace for something lighter over all which would be 67g for full headset ex cap and bolt, should be lighter then that when slimmed down . Thought will post it anyway

Image
Image


Sent from my iPhone using Tapatalk

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

Image
Image


Sent from my iPhone using Tapatalk

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

Image


Sent from my iPhone using Tapatalk

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

With some mock up parts in the sun


Image

Sent from my iPhone using Tapatalk

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

A full mock up with spare heavy'ish parts to check where things will go. 5.8kg pictured. Lighter parts on the way 4.7kg is looking realistic

Image
Image


Sent from my iPhone using Tapatalk

euph
Posts: 143
Joined: Wed May 13, 2015 10:35 pm

by euph

Looks nice. Do you plan to but two brakes on it in the final build?

Arfer01
Posts: 147
Joined: Wed Sep 16, 2015 9:34 am
Contact:

by Arfer01

Initially not, but now am seriously looking at it since I have come to my senses


Sent from my iPhone using Tapatalk

by Weenie


BmanX
Posts: 3844
Joined: Thu Nov 10, 2005 5:31 pm

by BmanX

I would stick with the single.
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5960g/13.13 lbs

Post Reply
  • Similar Topics
    Replies
    Views
    Last post