Ridley Helium SL 2014 - 5.19kg

[madtuna]

Hi. I am new here & just would like to show you my bike.
My initial plan was to build such as "affordable & economic super light build with the reliable manufacturers". However, since I bough Schmolke seat post & Campy wheels, the plan was slightly gone to wrong
Anyhow, hope you take a look & enjoy.
BTW, I intended colour matching - black, red & grey(silver) as much as I intended for weight reduction.
(In fact, the colour matching was more difficult than its weight reduction )

Frame set : Ridley Helium SL 2014 XS size
Headset : FSA(bundle in the frameset) + J&L compression plug + KCNC topcap
Seatpost clamp : KCNC SC7
Seatpost : Schmolke TLO setback 27.2mm 300mm + J&L york & cradle
Seat : Saevid Alien
Stem : KCNC SC Wing 110mm
Bar : Haerocarbon H.145 RR SL 42cm
Bar tape : Unknown cheapest on the web store
Bottle cages : AMOLRIGHIT + KCNC bolt
Cables : i-link + mini i-link
Brakes : KCNC C7
Front derailleur : Sram Red 22 + Carbonice Stummer Eugen chaincatcher
Rear derailleur : Sram Red 22 + Ridea 12T&14T + Tuning Pedals inner plate
Crankset : Sram Red 22 BB30 + Extralite octaramp RC2 + KCNC bolts
Bottom Bracket : Truvative PF30
Chain : YBN SLA-110
Shifters : Sram Red 22
Cassette : Sram Red 22 11-28
Wheelset : Campagnolo Bora One 35
Skewer : J&L Ti
Tires : Vittoria Corsa Elite 25C
Tape/glue : Tupo
Pedals : HT PK-01 Ti

[danbjpa]

Pretty light!
And i see that still have some places to save more weight (stem, seatpost clamp, yokes+cradle, spacers/topcap/cut steerer) but this is very good as shown.
The campy wheels matching perfect with this bike although Sram gruppo.
Welcome to the forum! [emoji106]
P.S.: you mean handlebar is H.145 RR SL, right? [emoji3]

[sjdong]

wow!!
I felt really nicely configured your efforts.
Recently, I have a lot of interest in the big pulley whether this performance?

[madtuna]

Pretty light!
And i see that still have some places to save more weight (stem, seatpost clamp, yokes+cradle, spacers/topcap/cut steerer) but this is very good as shown.
The campy wheels matching perfect with this bike although Sram gruppo.
Welcome to the forum!
P.S.: you mean handlebar is H.145 RR SL, right?

Thanks
Regarding the handlebar, you're right. It's my typo. It should have been H.145 RR SL



Sent from my iPhone using Tapatalk

[kgt]

Although I'de prefer a full campy look it looks very nice!
Seems like you need a setback seatpost though.

[madtuna]

wow!!
I felt really nicely configured your efforts.
Recently, I have a lot of interest in the big pulley whether this performance?

In fact, I don't feel anything better except for the shifting. Feels like the shifting get faster (a little )


Sent from my iPhone using Tapatalk

[madtuna]

Although I'de prefer a full campy look it looks very nice!
Seems like you need a setback seatpost though.

Thanks!
If campy gruppo were cheaper, I would choose Super Record for red colour :s

The seatpost is already a setback. Please take a look here - http://www.schmolke-carbon.de/carbon/ca ... etback.php


Sent from my iPhone using Tapatalk

[madtuna]

finally achieved lighter than a cod that triggered my weight reduction...
I marked the changes in red as below.

Frame set : Ridley Helium SL 2014 XS size
Headset : FSA(bundle in the frameset) + J&L compression plug + KCNC topcap
Seatpost clamp : KCNC SC7
Seatpost : Schmolke TLO setback 27.2mm 300mm + J&L york & cradle
Seat : Saevid Alien
Stem : KCNC SC Wing 110mm
Bar : Haerocarbon H.145 RR SL 42cm
Bar tape : Unknown cheapest on the web store
Bottle cages : Carbonworks cage & bolt
Cables : i-link + mini i-link
Brakes : KCNC C7
Front derailleur : Sram Red 22 + Carbonice Stummer Eugen chaincatcher
Rear derailleur : Sram Red 22 + Ridea 12T&14T + Tuning Pedals inner plate
Crankset : Sram Red 22 BB30 + Extralite octaramp RC2 + KCNC bolts
Bottom Bracket : Truvative PF30
Chain : YBN SLA-110
Shifters : Sram Red 22
Cassette : Sram Red 22 11-28
Wheelset : AX Lightness P38T (Tune hubs)
Skewer : J&L Ti
Tires : Tufo Composite Carbon 25C
Tape/glue : Tufo gluing tape
Pedals : HT PK-01 Ti

Total weight : 5.19kg

[Johnny Rad]

Maybe a new seat post, too?

Congrats on your light weight achievement.

[madtuna]

Maybe a new seat post, too?

Congrats on your light weight achievement.

Thanks. you've got keen sight! The seat post is the same one. I just changed position & the pin for colour matching

[junchen]

Do u have the detailed weights for the individual listing? V nice wt and nice exotic items...

Sent from my SM-G920I using Tapatalk

[madtuna]

Do u have the detailed weights for the individual listing? V nice wt and nice exotic items...

Sent from my SM-G920I using Tapatalk

Thanks. I didn't weigh every each parts at all. please check out the below weights in red!

Frame set : Ridley Helium SL 2014 XS size (1087g with the basic parts - folk, hanger & etc.)
Headset : FSA(bundle in the frameset) + J&L compression plug (8.5g) + KCNC topcap (5g)
Seatpost clamp : KCNC SC7 (13g)
Seatpost : Schmolke TLO setback 27.2mm 300mm + J&L york & cradle (97g)
Seat : Saevid Alien (77g)
Stem : KCNC SC Wing 110mm (105g)
Bar : Haerocarbon H.145 RR SL 42cm (158g)
Bar tape : Unknown cheapest on the web store
Bottle cages : Carbonworks cage (6.5g/1pc) & bolt (0.7g/pc)
Cables : i-link + mini i-link
Brakes : KCNC C7 (185g - a couple with the pads & bolts)
Front derailleur : Sram Red 22 (71g) + Carbonice Stummer Eugen chaincatcher (3.5g)
Rear derailleur : Sram Red 22 (268g) + Ridea 12T&14T(24g) + Tuning Pedals inner plate (3g)
Crankset : Sram Red 22 BB30 (364g-arms only) + Extralite octaramp RC2 (98g) + KCNC bolts
Bottom Bracket : Truvative PF30 (84g)
Chain : YBN SLA-110
Shifters : Sram Red 22 (285g)
Cassette : Sram Red 22 11-28 (179g)
Wheelset : AX Lightness P38T (Tune hubs) (1045g)
Skewer : J&L Ti (43g)
Tires : Tufo Composite Carbon 25C
Tape/glue : Tufo gluing tape
Pedals : HT PK-01 Ti (164g)

[junchen]

Tks madtuna. My build is on paper 5.9kg now. Damn.. It's not gonna be cheap to get to sub 5.9kg downwards.

Sent from my SM-G920I using Tapatalk

[3delis]

Mad tuna,
How you liking those ax p38s? Have some campy ultra clinchers, but thinking of getting a lightweight tubular set and have been eyeing those .

[madtuna]

Tks madtuna. My build is on paper 5.9kg now. Damn.. It's not gonna be cheap to get to sub 5.9kg downwards.

Sent from my SM-G920I using Tapatalk

that's why i prefer KCNC parts. I will keep my fingers cross for you!