Project Look 695 HELLCAT (update page 4: Final Pictures)
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Hi Tomyboy, yeah its a personal thing for the logo, which i can fully accept! I agree with your thoughts and like the full black and not the weave. My 695 (factory finish) has both, but the weave is only visible in parts and less so as its Matt black.
The gold bits have to go! Change the chain to a KMC X11SL DLC Black. I am sure that gold chain will be used on another ride .
Lig.
The gold bits have to go! Change the chain to a KMC X11SL DLC Black. I am sure that gold chain will be used on another ride .
Lig.
- tomyboy123
- Posts: 155
- Joined: Thu Oct 23, 2014 8:40 am
- Location: Europe
Lig wrote:Hi Tomyboy, yeah its a personal thing for the logo, which i can fully accept! I agree with your thoughts and like the full black and not the weave. My 695 (factory finish) has both, but the weave is only visible in parts and less so as its Matt black.
The gold bits have to go! Change the chain to a KMC X11SL DLC Black. I am sure that gold chain will be used on another ride .
Lig.
I tried so say that, some frames keep just a little weave visible in transition to the black, they started that with 2015 models I think. Majority are going to all black.
My thought exactly about the gold, it is going down, but will probably keep the drivetrain parts gold for now. It is not that disruptive as the majority of yellow is in front.
Don't know if I will invest 80 EUR for the black chain, just because of one photo?
Did have the black chain in the past and I didn't like the look and maintenance, after just one or two rides. It alway looks that is dirty.
- tomyboy123
- Posts: 155
- Joined: Thu Oct 23, 2014 8:40 am
- Location: Europe
beepbeep wrote:Great tribute to a great car!! (also a Mopar fan, check out my username )
- tomyboy123
- Posts: 155
- Joined: Thu Oct 23, 2014 8:40 am
- Location: Europe
Really satisfied with the weight, started with 6.9.
Calculation were spot on:
Went all black on the upper part of the bike and left drivetrain gold.
Surprisingly is not that bad as I thought. All black will be 100%, but...
Will post proper DSLR photos of the build next week.
Calculation were spot on:
Went all black on the upper part of the bike and left drivetrain gold.
Surprisingly is not that bad as I thought. All black will be 100%, but...
Will post proper DSLR photos of the build next week.
-
- Posts: 200
- Joined: Tue Jun 28, 2011 4:33 pm
- Location: United Kingdom
Love the colour scheme, but not the gold parts!
What size frame? almost 1kg lighter than my 695
What size frame? almost 1kg lighter than my 695
- tomyboy123
- Posts: 155
- Joined: Thu Oct 23, 2014 8:40 am
- Location: Europe
Ok, ok, you twisted my hand, gold chain will buy my friend and black chain has already been orderd.
Quick Releases will be painted black mat, so no more gold.
Quick Releases will be painted black mat, so no more gold.
Heh heh heh.... You know it makes sense.....
Looking forward to those SLR photos!!
Great weight too considering the parts list, I always thought electronic was a good 3-400g heavier than mechanical?!
Lig.
Looking forward to those SLR photos!!
Great weight too considering the parts list, I always thought electronic was a good 3-400g heavier than mechanical?!
Lig.
- tomyboy123
- Posts: 155
- Joined: Thu Oct 23, 2014 8:40 am
- Location: Europe
Lig wrote:Heh heh heh.... You know it makes sense.....
Looking forward to those SLR photos!!
Great weight too considering the parts list, I always thought electronic was a good 3-400g heavier than mechanical?!
Lig.
Yap, it doesn't make a whole lot more sense now...
Actually, latest DA and Ultegra Di2 are a few grams lighter than equivalente mechanical groupset.
Last edited by tomyboy123 on Wed Jan 13, 2016 12:28 pm, edited 2 times in total.
- tomyboy123
- Posts: 155
- Joined: Thu Oct 23, 2014 8:40 am
- Location: Europe
Any thoughts regarding cleaning and detailing matte finish?
I did some resurch and the guy who did the paint job recomended, that the best-tested option to polish the frame, after the wash is using mild soup and microfiber towel. For more toughest stains, you can use multipurpose degreaser, like Dexal, Meglio, Simple Green etc.
I tried this, when the build was finished and it works perfect.
My question now is regarding bike wash.
I use Morgan Blue Bike Wash, which is nice and foamy, but it has a protective wax-component in it.
Should I avoid washing matte frame with this product? Or it wouldn't do any big damage on a long term, as I use only one bottle screw of this stuf, for the whole wash?
I did some resurch and the guy who did the paint job recomended, that the best-tested option to polish the frame, after the wash is using mild soup and microfiber towel. For more toughest stains, you can use multipurpose degreaser, like Dexal, Meglio, Simple Green etc.
I tried this, when the build was finished and it works perfect.
My question now is regarding bike wash.
I use Morgan Blue Bike Wash, which is nice and foamy, but it has a protective wax-component in it.
Should I avoid washing matte frame with this product? Or it wouldn't do any big damage on a long term, as I use only one bottle screw of this stuf, for the whole wash?
-
- Posts: 73
- Joined: Fri Sep 18, 2015 7:43 am
Just avoid too much rubbing with the chamoix. I've starting to lose the matte on my supersix, and I suspect it's because she makes me excited and I rub a little too hard.
tomyboy123 wrote:Any thoughts regarding cleaning and detailing matte finish?
I did some resurch and the guy who did the paint job recomended, that the best-tested option to polish the frame, after the wash is using mild soup and microfiber towel. For more toughest stains, you can use multipurpose degreaser, like Dexal, Meglio, Simple Green etc.
I tried this, when the build was finished and it works perfect.
My question now is regarding bike wash.
I use Morgan Blue Bike Wash, which is nice and foamy, but it has a protective wax-component in it.
Should I avoid washing matte frame with this product? Or it wouldn't do any big damage on a long term, as I use only one bottle screw of this stuf, for the whole wash?
Swissvax & Chemical Guys for ex. have a full range of products for matte finish. Going from 'polish' to shampoo, incl some quick clean sprays and wax. Try to avoid any product with regular wax in it, even car shampoo, if you really want to keep the matte finish. And avoid rubbing to much. I hope for you that wile riding, your legs of bib shorts don't rub the paint, even very slightly, or you are getting glossy spots as I got with my matte Canyon. I ended up with a full and extensive polish to get and even gloss finish.
Current bikes:
Scott Addict Premium Disc 2018
Scott Addict Orica Greenedge 2015
Retired:
Canyon Endurace CF SLX 2016
Canyon Ultimate CF SLX 2013
Scott Addict Premium Disc 2018
Scott Addict Orica Greenedge 2015
Retired:
Canyon Endurace CF SLX 2016
Canyon Ultimate CF SLX 2013
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com