Hongfu FM-079 Disk road bike/ small update
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
dton13 wrote:Bike looks great! What skewers are those?
Having a disc road frame myself, I'm glad to see more options for brakes. Unfortunate that you can't run a 160 or even 140 in the rear though. Maybe a custom bracket is in order
the skewers are from Krex, Ti bolt, weight 45g.
my original setting is f160/r160, if i replaced with the spyre, then 140or 160 are fine.
do you have a link or contact for the Juin R1 brakes ? I have searched the web but except for a store in UK they are hard to find...
I would be interested in getting a set for my cyclocross/commuter bike 160 front and 140 rear.
thanks!
I would be interested in getting a set for my cyclocross/commuter bike 160 front and 140 rear.
thanks!
-
- Posts: 1163
- Joined: Sun May 16, 2010 7:28 pm
Don't you want the bigger rotor up front?
zulu695 wrote:do you have a link or contact for the Juin R1 brakes ? I have searched the web but except for a store in UK they are hard to find...
I would be interested in getting a set for my cyclocross/commuter bike 160 front and 140 rear.
thanks!
well, i think you can wrote them mail to their sales ,Candice <candy335c@yahoo.com.tw>
yes, seems not much in the international dealer now,
as it's a local manufacture, it's easy for me to get it.
you must not have looked very hard, took me about 15 seconds to find!
its on this page
http://www.hongfu-bikes.cn/product/1564 ... frame.html
also, deanet do you know how large of a tire the frame will fit?
its on this page
http://www.hongfu-bikes.cn/product/1564 ... frame.html
also, deanet do you know how large of a tire the frame will fit?
dogg wrote:you must not have looked very hard, took me about 15 seconds to find!
its on this page
http://www.hongfu-bikes.cn/product/1564 ... frame.html
also, deanet do you know how large of a tire the frame will fit?
i thick it's about 25c maximum, i put 23c in and there are about 3mm space left only.
this one is not for cyclocross at all.
Some update for recently,
just borrow a set of Tublar full carbon wheelset made by Yoeleo-bike, weight around 1300g,
direct cutting 830g by changing the wheel-set.
i will purchasing the same set as it's good for test ride, and good look as below~
20141122-DP1M9166 by deanet, on Flickr
20141122-DP1M9163 by deanet, on Flickr
just borrow a set of Tublar full carbon wheelset made by Yoeleo-bike, weight around 1300g,
direct cutting 830g by changing the wheel-set.
i will purchasing the same set as it's good for test ride, and good look as below~
20141122-DP1M9166 by deanet, on Flickr
20141122-DP1M9163 by deanet, on Flickr
- andreszucs
- in the industry
- Posts: 737
- Joined: Mon Nov 28, 2011 7:15 am
I can see that your last post was almost 10 months ago...but that's actually great for my question! I'm searching for long therm real world experience on these Juin hybrid calipers, I'm considering for my Mtb. So...anything you can share?
I had that discussion about these brakes over 1 year ago and someone expressed concern with the low volume oil chamber since its only on the caliper... and that could cause the caliper and pads to get hot really quick....is that something that you have experienced before?
I had that discussion about these brakes over 1 year ago and someone expressed concern with the low volume oil chamber since its only on the caliper... and that could cause the caliper and pads to get hot really quick....is that something that you have experienced before?
My stuff on sale https://www.ebay.com/sch/andreszucs/m.h ... pg=&_from=
Very nice [emoji7]
Inviato dal mio GT-I9070 utilizzando Tapatalk
Inviato dal mio GT-I9070 utilizzando Tapatalk