2015 s-works tarmac- weights

Who are you (no off-topic talk please)

Moderator: Moderator Team

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

hello everyone,
I'm excited about building a new road bike for this season, I crashed on a race in belgium at the summer and broke my tarmac sl4 frame :
Image

I orderd all the parts I need for building a new bike and I will update this thread when I will get them :soon:
Last edited by ophiravina on Sun May 10, 2015 10:21 am, edited 3 times in total.
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

by Weenie


User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

Attachments
QS6TUwTcKsmS7yzOQa-6dFdqm9KqVySVHXfwY_eb22Y.jpg
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

User avatar
shoopdawoop
Posts: 433
Joined: Thu Dec 22, 2011 12:37 am

by shoopdawoop

Is that frame the one that your building or was that one totaled in the crash? If so are you replacing it with another SL4 or the SL5 or something totally new?

Look forward to the progress in any event!

Love the heart also but it would look better with some shimano inside ;)

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

this is my broken frame :(
The sl4 was the best bike I rode on and it was awsome! stiff and light.
after I ruined it, I had to try the new model so I will build an 2015 tarmac frameset :D

I had 4 bikes equiped with shimano in the past but I wanted to try something diffrent.
sram force weight less than shimano's groups (even the dura ace 9000), I have some friends that ride it and recomend it and I like the idea of the double tap shifters. If I wouldn't like it I can always replace it with ultegra :wink:
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

today I went to to the LBS and started build the bike :-)

Image

some weights of components:

315 gram for the sram force shifters:
Image

173 gram for the rear der:
Image

88 gram for the front der:
Image

127 gram for kcnc c7 brakes without pads:
Image

188 gram with brake pads and shoes:
Image

bontrager bottle cages weight 80 gram:
Image

dura ace 7800 crankset weights 658 gram (could not find a way to take a pic where you can see both the crankset and the weight :evil: ):
Image

2015 s-works tarmac frame size 56 weight 1077 gram (with the stock plastic housing, titanium cage bolts, der hanger and bottom bracket):
Image
Image

2015 sworks tarmac fork weight 388 gram (uncut):
Image

s-works seatpost is 201 gram:
Image

adapter from pf30 to 24mm for shimano crankset is 61 gram:
Image

chain catcher 7 gram:
Image

headset 50 gram:
Image

expender 15 gram:
Image

spacers 6 gram:
Image

top cap and bolt 18 gram:
Image

ritchey wcs stem is 126 gram:
Image

I orderd a crabon bar but didnt get it yet so I will build the bike with aluminium bar that weights 300 gram and will change it in the future :-)
Last edited by ophiravina on Thu Apr 02, 2015 5:00 pm, edited 3 times in total.
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

almost finished :-)

toupe pro saddle weight 165 gram (366-201):
Image

jazz bar tape weight 46 gram:
Image

ritchey bar plugs are 5 grams:
Image

bike is almost ready:
Image

fork after cuting it weight 354 gram:
Image

bike weight with ksyrium elite s wheels is 7.3 kg:
Image
Image
Last edited by ophiravina on Thu Apr 02, 2015 5:01 pm, edited 2 times in total.
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

today I weighted the bike with the racing wheels: matrix tx 50
7.04 kg
Image
Image

sorry for the long pOst with a lot of pics but I wanted to know the weight of all the components and wanted to have a place that I could always look at
Last edited by ophiravina on Thu Apr 02, 2015 5:03 pm, edited 1 time in total.
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

the sram force front deraileur doesn't work well.
I'm replacing it with a good old dura ace 7800 der (weight 72 gram) (also saving 16 gram :twisted: ):
Image

and to finish the build I bought an 3t aeronova handlebar. it will help me set up my position and will decrese the bike weight in 100 gram:
Image

I installed the der and the stem on the bike but I didn't install the handlebar becouse the internall housing takes a lot of time to install, I will do it on sunday and will post good pics of the bike :-)

what do you guys think about the bike?
Last edited by ophiravina on Thu Apr 02, 2015 5:13 pm, edited 1 time in total.
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

User avatar
rasmussloth
Posts: 314
Joined: Mon Dec 09, 2013 3:19 pm
Location: Denmark

by rasmussloth

Fine bike.

It deserves a better crankset though.

stuka666
Posts: 296
Joined: Fri Apr 29, 2011 3:28 pm
Location: portugal

by stuka666

Change the cranks please :D

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

rasmussloth wrote:Fine bike.

It deserves a better crankset though.


thank you, I dont think I will change the crankset in the near future, I already spent a lot of money on this bike. maybe if I get a good deal on fsa slk\sram red bb30 crankset, I will take it. it could save about 150-200g :beerchug:

some photos from a training ride this morning:
Image
Image
Image
Image
Image
Image
Image
Last edited by ophiravina on Thu Apr 02, 2015 5:22 pm, edited 2 times in total.
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

yesterday I went to the LBS and they installed the bar on my bike. I went for a short ride around the parking lot to check it out and it flexed a lot and made creacking sounds. I did a short willy and when I landed there was breaking sound and the bar cracked in the middle section. very disappointing, it was installed using a torque wrench and there was no reason for it to break beside poor engineering and poor quality. I'm going back to aluminium bars and I dont recommend buying this bar to anyone.
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

jumma
Posts: 35
Joined: Wed Dec 03, 2014 6:04 am

by jumma

That is an awesome looking bike.

Just need to get rid of those cranks.

Pity about the bars huh.

So. One question. The weight for the frame. Is this including BB, bearings, cage bolts, RD and FD hangers and bolts?

Reason I ask is because I am looking at this same frame, actually I am going to try and pick up a Tarmac S-works 56 in the all black otherwise same paint as yours (I think the black on black may be available for the disc module frame only).

I am comparing this bike to the Wilier 2015 Zero 7 in black.

Once again. Sweet build. Would look awesome with some nice dark great Dura ace Cranks or S-works Carbon. Also some carbon rims would do it justice.

How does it ride after riding some time on it now? Interested in your thoughts on smoothness, vibration dampening, weight, balance, acceleration, corner and braking handling, climbing etc.

Cheers

Jumma

jvanv8
Posts: 946
Joined: Sat Feb 02, 2008 2:37 pm
Location: Northeast USA

by jvanv8

Looks great. That BB area on the frame is massive!
Which bars were a problem? The build photos look like a Bontrager X or XXX but you also mentioned the Aeronova. Lots of these bars end up on eBay after not passing QC (no fault to either brand but more of a gray market issue). Could this have been the problem?
AX Vial Evo: 4970g
Addict SL : 5235g
My Cycling Blog
Strava: Wayward Cyclist

by Weenie


User avatar
ophiravina
Posts: 125
Joined: Thu Sep 26, 2013 5:44 pm

by ophiravina

the bars in the photo are xlc pro racebar. originally, I wanted to put the 3t aeronova ltd bars on the bike but it took some time untill they arived. I bought the xlc bars so I could ride the bike in the meantime.
after I got the 3t bars and installed them, I test rode the bike in the parking lot and popped a willy, the bars got cracked when I landed. :x very dissapointing :cry: ...
I installed the xlc bars back on the bike and I will ride with them for now.
I got warrenty and they sent me another bar but I dont want to try carbon bars again, I'm afraid that maybe they will brake in the middle of a race.
I will upload some photos of the bar and the crack when I get home :)
2016 scott adictt 10:
viewtopic.php?f=10&t=135903
2015 sworks tarmac :
viewtopic.php?f=10&t=128782

Post Reply
  • Similar Topics
    Replies
    Views
    Last post