2014 Cervelo R5 54...5.9 kg
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Build List:
Frame - Cervelo R5 2014 Frame - 775 g w/o hardware, hanger, collar
Fork - THM / Cervelo R5CA Fork - 281 g cut w/ THM starnut
Wheelset - Enve 45 Classic Tubular + Chris King 45 Pewter 28 / 24 holes - 1226 g
Crank - THM Clavicula 130 BCD 172.5 - 354 g
Bottom Bracket - THM BB Right - 91 g
Brakes - EE Brakes w/o pads - 166 g
Brake Pads - Enve Grey - 20 g
Saddle - Fizik Antares 00 - 138 g
Seatpost - Ritchey Superlogic 27.2 x 350 mm + Toronto Cycles Ti bolt - 160 g
Stem - Ritchey Superlogic C260 130 mm - 137 g
Handlebar - Enve Compact 44 cm - 217 g
Tires - Veloflex Sprinter x 2 - 500 g
Pedals - DA 9000 - 253 g
Headset - Total Mutt = "Cervelo" / TH Industries Bearing 1 3/8 " + 1 1/8 " + FSA Carbon 7.5 mm + 2 x Soul Kozak 10 mm spacers + 5 mm KCNC Hollow Alu Spacer + Extralite Hyper Cap = No Idea g
Skewers - KCNC Ti - 46 g
Chain - KMC X11SL - 235 g
Chain Rings - Praxxis 130 53/39 - 120 g
Chain Ring Bolts - KCNC Double SL - 9 g
FD - DA 9000 - 65 g
RD - DA 9000 w/ AEST pulleys - 165 g
STI - DA 9000 - 365 g
Cassette - DA 9000 - 175 g
Bottles Cages - Tune Skyline x 2 w/ steel bolts instead of shitty alu - 20 g
Bar tape - Lizard Skin 1.8 - ~ 50 g
Misc - Alligator i Link Brake Housing, Shimano SLR Shift Housing, Tape, Enve Valve Extenders + Grease, Dirt and any other shit I didn't / couldn't weigh
Shop Rapala scale reads 12.9 lbs which roughly and most conservatively is 5.9 kg
Frame - Cervelo R5 2014 Frame - 775 g w/o hardware, hanger, collar
Fork - THM / Cervelo R5CA Fork - 281 g cut w/ THM starnut
Wheelset - Enve 45 Classic Tubular + Chris King 45 Pewter 28 / 24 holes - 1226 g
Crank - THM Clavicula 130 BCD 172.5 - 354 g
Bottom Bracket - THM BB Right - 91 g
Brakes - EE Brakes w/o pads - 166 g
Brake Pads - Enve Grey - 20 g
Saddle - Fizik Antares 00 - 138 g
Seatpost - Ritchey Superlogic 27.2 x 350 mm + Toronto Cycles Ti bolt - 160 g
Stem - Ritchey Superlogic C260 130 mm - 137 g
Handlebar - Enve Compact 44 cm - 217 g
Tires - Veloflex Sprinter x 2 - 500 g
Pedals - DA 9000 - 253 g
Headset - Total Mutt = "Cervelo" / TH Industries Bearing 1 3/8 " + 1 1/8 " + FSA Carbon 7.5 mm + 2 x Soul Kozak 10 mm spacers + 5 mm KCNC Hollow Alu Spacer + Extralite Hyper Cap = No Idea g
Skewers - KCNC Ti - 46 g
Chain - KMC X11SL - 235 g
Chain Rings - Praxxis 130 53/39 - 120 g
Chain Ring Bolts - KCNC Double SL - 9 g
FD - DA 9000 - 65 g
RD - DA 9000 w/ AEST pulleys - 165 g
STI - DA 9000 - 365 g
Cassette - DA 9000 - 175 g
Bottles Cages - Tune Skyline x 2 w/ steel bolts instead of shitty alu - 20 g
Bar tape - Lizard Skin 1.8 - ~ 50 g
Misc - Alligator i Link Brake Housing, Shimano SLR Shift Housing, Tape, Enve Valve Extenders + Grease, Dirt and any other shit I didn't / couldn't weigh
Shop Rapala scale reads 12.9 lbs which roughly and most conservatively is 5.9 kg
Last edited by newforker on Mon Aug 11, 2014 10:18 pm, edited 7 times in total.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Very nice build, not a fan of the white saddle, hoods, cables though. All black would look cleaner I think.
Evo 4.9kg SL3 6.64kg Slice RS 8.89kg viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
Agree on the all black look, but the white doesn't bother me enough to spend a few hundred bucks to go all black...
2015 FELT AR1 TeXreme! http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134989
2015 FELT AR1 TeXreme! http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134989
The only good looking Cervelo color scheme!
I like the bike
The Ritchey stem isn't bad, and the matte finish goes together with the frame nicely, however, I find it too bulky for the skinny tubes. Just a little too much of disproportions there.
I like the bike
The Ritchey stem isn't bad, and the matte finish goes together with the frame nicely, however, I find it too bulky for the skinny tubes. Just a little too much of disproportions there.
Minimum bike categories required in the stable:
Aero bike | GC bike | GC rim bike | Climbing bike | Climbing rim bike | Classics bike | Gravel bike | TT bike | Indoors bike
Aero bike | GC bike | GC rim bike | Climbing bike | Climbing rim bike | Classics bike | Gravel bike | TT bike | Indoors bike
-
- Posts: 66
- Joined: Fri Jul 20, 2012 6:09 am
great looking R5 !
actually looking for the same frame/bike now.
is that Wheels of Bloor ?
actually looking for the same frame/bike now.
is that Wheels of Bloor ?
It sure is!
2015 FELT AR1 TeXreme! http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134989
Hey, awesome bike. How did you make your i-links work with the 9000 levers? Did you splice it with standard outer or did you use a special ferrul?
Parlee Altum 5.65kg (sold)
http://weightweenies.starbike.com/forum/viewtopic.php?t=134997
Sub 5kg Scott addict Singlespeed
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=144598
http://weightweenies.starbike.com/forum/viewtopic.php?t=134997
Sub 5kg Scott addict Singlespeed
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=144598
Arfer01 wrote:Hey, awesome bike. How did you make your i-links work with the 9000 levers? Did you splice it with standard outer or did you use a special ferrul?
I had the i-links just for the brakes and had them running all the way into the lever. Probably not the smartest idea as they basically got jammed in the brake lever itself. Luckily, I was able to pull all segments out of the lever. Hope this helps!
2015 FELT AR1 TeXreme! http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134989
newforker wrote:Arfer01 wrote:Hey, awesome bike. How did you make your i-links work with the 9000 levers? Did you splice it with standard outer or did you use a special ferrul?
I had the i-links just for the brakes and had them running all the way into the lever. Probably not the smartest idea as they basically got jammed in the brake lever itself. Luckily, I was able to pull all segments out of the lever. Hope this helps!
Hi, are you using the larger brake outer or the smaller gear outer? any help would be appreciates as this is something i have been trying to make work for months, see image the blue is how far the brake outer goes and th red is how far it needs to go
http://imgur.com/lhB2mN6
Parlee Altum 5.65kg (sold)
http://weightweenies.starbike.com/forum/viewtopic.php?t=134997
Sub 5kg Scott addict Singlespeed
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=144598
http://weightweenies.starbike.com/forum/viewtopic.php?t=134997
Sub 5kg Scott addict Singlespeed
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=144598
Great build . Beautiful.
IMO the stem looks to big and ruins the flow of the bike. A smaller stem, normal size would look a lot better IMO.
IMO the stem looks to big and ruins the flow of the bike. A smaller stem, normal size would look a lot better IMO.
Xena a demi god among the digital demimonde that is WW community
http://i.imgur.com/hL5v3ai.jpg
https://www.flickr.com/photos/131970499@N02/
http://i.imgur.com/hL5v3ai.jpg
https://www.flickr.com/photos/131970499@N02/
I totally agree, it was really different from the rest of the bike..but I got rid of that bike a while ago, decision I regret..one of my favourite bikes
2015 FELT AR1 TeXreme! http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134989
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com