After sufficient thought, I decided to bite the bullet and purchase carbon clincher wheels from Farsports. I picked up Kyle's contact via WW forum and as how everyone else has reflected, his service exceeded my expectations. I got the 38mm x 25mm carbon clinchers with EDHub and Sapim CX-Ray spokes and nipples. It came with a pair of skewers and 2 pairs of brake pads.
Rear wheel weight w/o skewers
Front wheel weight w/o skewers
Wrapping these with Continental GP400SII tyres and Michelin A1 tubes with Vittoria rim tapes. Will probably go for Veloplugs in the near future, but rim tapes will do for now.
I've also gotten a Pro PLT stem 10º 100mm to replace the 3T Arx Pro 6º 110mm stem.
The rims were definitely wider and the TRP 920 SL brake calipers weren't actually working very well. TRP stated that the maximum rim width that it could take is a 23mm. Got my hands on a pair of good used SRAM Red 2011 brake calipers. Weight went up a little, but wasn't planning on doing it super light anyways on this tight budget. Updated list:
Pro-Lite Cuneo GP
7.29kg (w/ Garmin and mount)
Pro-Lite Cuneo GP 7046 Alloy Road frame (50.5cm C-T)
Pro-Lite Liguria Ponente fork
Pro-Lite Ancona headset
Pro-Lite Garda seatpost clamp
GUB G-0316 31.6 Aluminium seatpost
Selle Italia SLR XP saddle
Pro PLT 10º 100mm stem
Ritchey WCS Curve 400mm bar
SRAM Red bartape
Elite Custom Race bottle cages
Jagwire Racer cable kit
SRAM Red 2011 brakes
SRAM Force front derailleur
SRAM Force rear derailleur
FSA SL-K Light Compact 172.5 crankset
FSA Road MegaExo Ø24 bottom bracket
Stronglight CT2 52/36t
Shimano Dura Ace CS-7900 11-25t cassette
Farsports 38mm x 25mm Clincher / EDHub / Sapim CX-Ray / Sapim SILS wheels
Michelin A1 tubes
Continental GP4000SII 23mm tyres
Exustar E-PR100PP pedals
Garmin 500, Tate Labs Bar Fly 2.0 mount
I'm looking at getting a Rotor crankset some time (because current crank arms are 172.5mm and I should be running 170mm), and later on probably add on the P2M.