Canyon Ultimate CF SLX 9.0 LTD - tweaking finished
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 4
- Joined: Thu Jul 10, 2014 9:09 pm
Finally finished tweaking my new ride and thought I would post a couple of pics of my new found love, pride and joy.. Perhaps I'll change the handlebar tape to a less shiny one. Any good suggestions?
Regards,
Johan
Regards,
Johan
Last edited by johanludvigsson on Fri Jul 11, 2014 11:10 am, edited 1 time in total.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 30
- Joined: Sat Dec 21, 2013 7:17 pm
Wecome Johan
Ritchey have just released the C260 carbon stem in Canyon specific 1 1/4" size's, just fitted one to mine and it matches the matt finish of the frame perfectly. 130mm @ 125 grams !
P.S. Have you got the correct frame size ?
Ritchey have just released the C260 carbon stem in Canyon specific 1 1/4" size's, just fitted one to mine and it matches the matt finish of the frame perfectly. 130mm @ 125 grams !
P.S. Have you got the correct frame size ?
-
- Posts: 4
- Joined: Thu Jul 10, 2014 9:09 pm
Hi,
I am a little bit off sidewise. Guess you ask as I have got a rather short stem?
I bought the bike at Canyon in Koblenz, where a fitting was done. Which actually suggested that I would go for a 62 bike. (the one I've got is 60) I am 1.89 but with very long legs/short upper body, thats why I end up with a short stem.
Do you know if the new stem exists in shorter lengths?
I am a little bit off sidewise. Guess you ask as I have got a rather short stem?
I bought the bike at Canyon in Koblenz, where a fitting was done. Which actually suggested that I would go for a 62 bike. (the one I've got is 60) I am 1.89 but with very long legs/short upper body, thats why I end up with a short stem.
Do you know if the new stem exists in shorter lengths?
Last edited by johanludvigsson on Thu Jul 10, 2014 9:39 pm, edited 1 time in total.
-
- Posts: 30
- Joined: Sat Dec 21, 2013 7:17 pm
Check out Ritcheys website or R2-bike.com my friend
-
- Posts: 4
- Joined: Thu Jul 10, 2014 9:09 pm
Hi Frankie13,
How do you figure? The stem on this one is actually a bit too short for my taste but needed for my size... I would presume that on a 62 I would have a bigger problem.
How do you figure? The stem on this one is actually a bit too short for my taste but needed for my size... I would presume that on a 62 I would have a bigger problem.
Hi, I just ordered a 60/XL frameset myself last week. can you advise on the measurement from the center of the BB to the rails of the saddle on this build?
Thanks
Thanks
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 4
- Joined: Thu Jul 10, 2014 9:09 pm
Hi aarw,
Congrats on the new purchase. Hope you'll be as happy with it as I am with mine..
Just measured and right now it is 81.1cm. (at the time of the pic it is possible that I was a couple of mm more. perhaps 81.4-6)
regards,
Congrats on the new purchase. Hope you'll be as happy with it as I am with mine..
Just measured and right now it is 81.1cm. (at the time of the pic it is possible that I was a couple of mm more. perhaps 81.4-6)
regards,