Fuji Altamira ultegra 6870 di2 build

Who are you (no off-topic talk please)

Moderator: Moderator Team

Post Reply
prebsy
Posts: 761
Joined: Tue Oct 23, 2012 10:52 pm
Location: PHL

by prebsy

I've always wanted to do a detailed build thread and now that I've got my new altamira frame I've finally got a chance. First a little background. I used to work at a fuji dealer and I sweat their bikes really hard. This will be my 3rd altamira and my 4th fuji, I also have a 2014 SST.

I've decided to build it up with ultegra 6870. I know it will be an uphill battle to bring this bike to a respectable weight but with a few light parts and some carbon tubulars I should get close to 6KG (fingers crossed).

Weights:
frame with all the trinkets:1006g
fork uncut with crown race:391g
headset: 129g
The headset is portly and I will need to buy a Cannondale Evo SI Expanding Compression Wedge to cut the fat.
2013 Altamira 1.1 frameset Manufacturer size 53cm (56cm eTT)
Image

User avatar
jbaillie
Posts: 437
Joined: Thu Nov 01, 2012 4:17 pm
Contact:

by jbaillie

Careful, I think there's someone eyeing your new frameset...

by Weenie


vtspot
Posts: 48
Joined: Mon Jun 02, 2014 4:34 am

by vtspot

I am too, looking to build a di2 bike, keep us posted.. :)

prebsy
Posts: 761
Joined: Tue Oct 23, 2012 10:52 pm
Location: PHL

by prebsy

Just got some parts from bontrager and shimano.
Shimano Junction A box with mount-15g
Shimano Junction B internal- 4g
2x(Shimano pro carbon UD bottle cage with bolts)-76g

Bontrager XXX aero 40cm handlebar-221g
Image

Bontrager XXX 31.6,330mm, 5mm offset with oversized rail clamp-176g
Image

Bontrager Race X light 110mm, 17 degree-141g
Image

Bontrager Paradigm XXX, 148mm-157g
Image

prebsy
Posts: 761
Joined: Tue Oct 23, 2012 10:52 pm
Location: PHL

by prebsy

I threw on my tubulars just to get some more weights and a nice pic of the progress thus far:
Far sports 24mm tubular rear w/ vittoria corsa cx, ultegra 6800 11-28 cassette-1207g
Far sports 24mm tubular front w/ vittoria corsa cx-774g
BikeHubStore Ti skewers-43g
Image

istigatrice
Posts: 779
Joined: Sat May 12, 2012 8:32 am
Location: Australia

by istigatrice

looking good... did you have a trek or something previously?
I write the weightweenies blog, hope you like it :)

Disclosure: I'm sponsored by Velocite, but I do give my honest opinion about them (I'm endorsed to race their bikes, not say nice things about them)

mannymerc
Posts: 62
Joined: Thu Jun 05, 2014 6:41 am

by mannymerc

Looks good so far.

Thanh
Posts: 30
Joined: Sun Apr 27, 2014 10:42 pm

by Thanh

Looking nice, can't wait to see the result. I just ordered 6870 di2 for my HongFu frame, should start a thread like your as well :)

prebsy
Posts: 761
Joined: Tue Oct 23, 2012 10:52 pm
Location: PHL

by prebsy

sorry chaps, I had to stop the build. I sold the frame to a friend in need.

vtspot
Posts: 48
Joined: Mon Jun 02, 2014 4:34 am

by vtspot

prebsy wrote:sorry chaps, I had to stop the build. I sold the frame to a friend in need.

In the progress of building bike and have been reading posts in this site. Sorry to hear that you have sold the frame. Looking forward for your next build then. :)

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post