Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Sep 26, 2016 1:17 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 55 posts ]  Go to page 1 2 3 4 Next
Author Message
 Post subject: My new Colnago C60 frame
PostPosted: Tue Apr 01, 2014 4:17 pm 
Offline

Joined: Mon Apr 10, 2006 8:45 pm
Posts: 36
Location: Denmark
Hi guys.
Today I received my new Colnago C60 frame size 50S. Very nice finish and for those of you who wants to now the weight it is as follows. 1220 gr. including bearings in the headtube which are pressed in from factory and also including the lugs (ThreadFit82.5), which are compatible for Pressfit 86,5 BB and also including the seat collar. The carbonfork came at 420 gr. uncut. Now I guess that both the frame and also my self are looking forward to see the frame be equiped with Campagnolo SR EPS groupset, Xentis Silverline wheels, Speedplay Zerro Ti pedals, Colnago (Selle Italia SLR Kit Carbonio Flow saddle), stem, seatpost and handlebar.https://www.dropbox.com/s/uqrldwqa6ng22 ... adtube.JPG
https://www.dropbox.com/s/mbjfqd1sguc9v68/C60.JPG


Attachments:
File comment: Here you see my bicycle assembled.
If you want to see it in higher res. please visit.
https://www.dropbox.com/s/330hx27duuskr8d/IMG_1022.JPG

C60.jpg
C60.jpg [ 53.71 KiB | Viewed 8265 times ]


Last edited by geca on Fri May 16, 2014 9:15 pm, edited 5 times in total.
Top
   
 Post subject: My new Colnago C60 frame
Posted: Tue Apr 01, 2014 4:17 pm 


Top
   
 
PostPosted: Tue Apr 01, 2014 4:31 pm 
Offline

Joined: Sun Jun 17, 2012 3:15 pm
Posts: 191
Congratulations.

What size is it? And do you get any adapters for different cranks included?


Top
   
PostPosted: Tue Apr 01, 2014 4:40 pm 
Offline
User avatar

Joined: Sat Jun 19, 2010 8:21 pm
Posts: 444
Location: Zürich, Switzerland
pics ? :)

_________________
Hucken The Fard Up !
Colnagos : C50 ST01 - Master 30th AD10 - C40 Mapei WC


Top
   
PostPosted: Tue Apr 01, 2014 4:43 pm 
Offline

Joined: Mon Apr 10, 2006 8:45 pm
Posts: 36
Location: Denmark
Zakalwe wrote:
Congratulations.

What size is it? And do you get any adapters for different cranks included?

As written - Size 50S, which means slope. It is in normal geometry the same as size 53. There is no extra adapters for the BB.


Top
   
PostPosted: Tue Apr 01, 2014 5:10 pm 
Offline

Joined: Fri Mar 07, 2014 11:58 am
Posts: 5
Pictures?!

And more info on the bottom bracket please?! :)

So just a Pressfit 86.5 BB cup set is required to fit the cranks?


Top
   
PostPosted: Tue Apr 01, 2014 5:20 pm 
Offline

Joined: Mon Apr 10, 2006 8:45 pm
Posts: 36
Location: Denmark
[quote][/quote][quote="topgun06"]Pictures?!

And more info on the bottom bracket please?! :)

So just a Pressfit 86.5 BB cup set is required to fit the cranks?


Yes it is for Pressfit 86,5 BB. I guess there will come other options as a tool for removing the lugs are included with the frame.


Top
   
PostPosted: Tue Apr 01, 2014 8:32 pm 
Offline
User avatar

Joined: Thu Jan 01, 2004 3:49 am
Posts: 953
Location: Kingston, the heart of UK weenie-ism
Speaking as a long time Colnago owner, that is a very disappointing weight.

Looks lovely though.

_________________
My EPS: http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=72682


Top
   
PostPosted: Tue Apr 01, 2014 8:49 pm 
Offline
User avatar

Joined: Sun Nov 07, 2010 9:14 pm
Posts: 3433
I can't see the pics. Hopefully when I'm in front of a real computer...


Sent from my iPhone using Tapatalk

_________________
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL


Top
   
PostPosted: Tue Apr 01, 2014 9:22 pm 
Offline

Joined: Tue Jun 23, 2009 10:47 pm
Posts: 227
It has about 130 grams of bearings pre-installed. That gorgeous red paint probably weighs quite a bit also.


Top
   
PostPosted: Tue Apr 01, 2014 10:17 pm 
Offline
User avatar

Joined: Sun Nov 07, 2010 9:14 pm
Posts: 3433
Hey, how much does that fork weigh again? You say 420grams uncut? I presume that is with the crown race on there. That's odd, because I've just weighed and reweighed a C60 uncut fork in MTBK which has got to have less paint on it, and it comes out at 442grams, with crown race, and a 330mm uncut steertube. I find it strange there would be that much weight difference, not that 20 grams is huge but it's not insignificant either if all else is equal. But yours has also got some significant paint on it. Perhaps the steertube is shorter, for the smaller frame, although I've not known them to make different length steertubes depending on frame size?. But maybe this one that I'm weighing is slightly different than final production C60 runs? Just want to verify you're sure of that weight. Thanks.

_________________
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL


Top
   
PostPosted: Tue Apr 01, 2014 10:25 pm 
Offline

Joined: Thu Dec 17, 2009 8:35 pm
Posts: 53
Beauty


Top
   
PostPosted: Tue Apr 01, 2014 10:46 pm 
Offline

Joined: Mon Apr 10, 2006 8:45 pm
Posts: 36
Location: Denmark
Calnago wrote:
Hey, how much does that fork weigh again? You say 420grams uncut? I presume that is with the crown race on there. That's odd, because I've just weighed and reweighed a C60 uncut fork in MTBK which has got to have less paint on it, and it comes out at 442grams, with crown race, and a 330mm uncut steertube. I find it strange there would be that much weight difference, not that 20 grams is huge but it's not insignificant either if all else is equal. But yours has also got some significant paint on it. Perhaps the steertube is shorter, for the smaller frame, although I've not known them to make different length steertubes depending on frame size?. But maybe this one that I'm weighing is slightly different than final production C60 runs? Just want to verify you're sure of that weight. Thanks.


Hi Calnago
I have controled the weight again. It says 429 grams including the crown for the bearring. So the weight is correct and I can also inform you that the length of the steertube is 330 mm.
I too have noticed that this fork is leighter than my previous C59. :)
https://www.dropbox.com/s/zdeb7z1tdn4u2 ... 20fork.jpg


Top
   
PostPosted: Tue Apr 01, 2014 10:51 pm 
Offline

Joined: Sat Dec 07, 2013 10:15 pm
Posts: 560
rico wrote:
Speaking as a long time Colnago owner, that is a very disappointing weight.

Looks lovely though.



Beautiful bike. Enjoy.

_________________
Colnago C-59 (Dura Ace)
Firefly(Ultegra)
Trek 5200(ultegra)


Top
   
PostPosted: Tue Apr 01, 2014 11:02 pm 
Offline
User avatar

Joined: Sun Nov 07, 2010 9:14 pm
Posts: 3433
geca wrote:
Calnago wrote:
Hey, how much does that fork weigh again? You say 420grams uncut? I presume that is with the crown race on there. That's odd, because I've just weighed and reweighed a C60 uncut fork in MTBK which has got to have less paint on it, and it comes out at 442grams, with crown race, and a 330mm uncut steertube. I find it strange there would be that much weight difference, not that 20 grams is huge but it's not insignificant either if all else is equal. But yours has also got some significant paint on it. Perhaps the steertube is shorter, for the smaller frame, although I've not known them to make different length steertubes depending on frame size?. But maybe this one that I'm weighing is slightly different than final production C60 runs? Just want to verify you're sure of that weight. Thanks.


Hi Calnago
I have controled the weight again. It says 429 grams including the crown for the bearring. So the weight is correct and I can also inform you that the length of the steertube is 330 mm.
I too have noticed that this fork is leighter than my previous C59. :)
https://www.dropbox.com/s/zdeb7z1tdn4u2 ... 20fork.jpg

Ahhh... I just looked at your picture. Your fork is a bit different than the one on the 2014 C59 I just received. The one I have does not have the sculpted front leading edge that yours does. Must be an earlier version pre C60 final production run. That explains the difference I guess. Thanks.

_________________
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL


Top
   
Posted: Tue Apr 01, 2014 11:02 pm 


Top
   
 
PostPosted: Tue Apr 01, 2014 11:29 pm 
Offline
User avatar

Joined: Sun Nov 07, 2010 9:14 pm
Posts: 3433
I was just curious as to the difference as I assumed the forks I was comparing were identical. Curiosity satisfied.
Nice bikes for sure.

_________________
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 55 posts ]  Go to page 1 2 3 4 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Colnago Mix frame!? any opinions, please

in Road

bogdanescu

5

603

Tue Jun 21, 2016 9:26 am

kgt View the latest post

There are no new unread posts for this topic. Drilling Colnago frame for di2

[ Go to page: 1 2 ]

in Road

Tooslow

28

2303

Sat Apr 30, 2016 5:09 pm

Junior7 View the latest post

There are no new unread posts for this topic. Identifying a nameless colnago frame*images now added*

[ Go to page: 1 2 ]

in Road

TomColnago

20

1138

Fri Feb 05, 2016 9:28 am

kgt View the latest post

There are no new unread posts for this topic. Looking for trade. 54s colnago c59 Italia mechanical frame/fork seatpost for 56s or 59 traditionsl

in For sale - Pictures are mandatory 22-3-13

Bantamben

0

172

Tue Aug 09, 2016 7:58 pm

Bantamben View the latest post

There are no new unread posts for this topic. Stahlern pegorichie uber os steel bike with Athena and colnago cox zero carbon frame

in For sale - Pictures are mandatory 22-3-13

Bantamben

0

337

Tue Jul 05, 2016 3:56 am

Bantamben View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], LAN, Look565w, seaneT1 and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited