HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Articles FAQ Contact About




Post new topic Reply to topic  [ 21 posts ] 
Go to page 1, 2  Next
Author Message
PostPosted: Sun Nov 03, 2013 4:27 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
Hello,

I found a nice 2nd hand CAAD10 in 63 cm to replace my old roadbike.
The 2011 model has in my opinion one of the best color schemes!
My intention is to exchange parts in order to reach the UCI limit (6.8 kg) or lower,
I would like to keep the upgrade budget "reasonable". (< 1000 Euro)
My first step was to get planet X brakes, 245 gr a set (for 40 euro) and exustar Keo pedals 252 gr (33 euro)
I am looking to replace stem/handlebar/seatpost saddle, etc.

Attachment:
CAAD10-2011.JPG
CAAD10-2011.JPG [ 105.76 KiB | Viewed 3635 times ]

First ideas are:
Soul 2.0 wheelset (1300g) for ~440 euro
KCNC seatpost (145 gr) ~70 Euro
KCNC handlebar 44 cm (210 gr) ~70 Euro
chinese carbon saddle ?

The ultegra shifters are heavy, I would like to replace those with campagnolo chorus of sram force or red (even lighter!)
(btw. I' m 1.93m tall / 83 kg)

Any suggestions or comments are welcome!


Last edited by J00P on Mon Nov 25, 2013 7:59 pm, edited 5 times in total.

Top
 Profile  
 
Posted: Sun Nov 03, 2013 4:27 pm 


Top
  
 
PostPosted: Sun Nov 03, 2013 4:31 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
I collected the weights of the current components from the internet
(no personal measurements)

CAAD 10 ultegra..................................................weight
Frame 63cm CAAD10...................................................1350
Fork speed save Carrbon...............................................425
Headset bearings c'dale .................................................42
Headset cone c'dale carbon............................................15
Headset cap/expander ..................................................49
Crank FSA SL-K Light Carbon BB30, 50/34.........................680
Bottom Bracket FSA BB30..............................................84
Shifters Shimano Ultegra 6700........................................440
Cog Set Shimano Ultegra 6700.......................................220
Chain Shimano Ultegra 6700...........................................253
Front Derailleur Shimano Ultegra 6700...............................89
Rear Derailleur Shimano Ultegra 6700...............................195
cables.....................................................................150
Wheels Mavic Aksium S WTS + Tires...............................2425
Pedals.....................................................................N/A
Brake Shimano Ultegra 6700...........................................335
Handlebar Cannondale C3 Compact................................320
Grips Cannondale Bar Tape w/Gel, 2.5mm..........................55
Stem Cannondale C3, 120mm, 6 deg................................139
Saddle Prologo scratch pro ...........................................268
Seat Post Cannondale C2, UD Carbon, 27.2x300mm............278
Seat Post clamp cannondale 30.9....................................15
bottle cage................................................................N/A
bottle cage bolts.........................................................N/A
TOTAL 7.8 kg


Last edited by J00P on Sun Dec 01, 2013 2:40 pm, edited 4 times in total.

Top
 Profile  
 
PostPosted: Sun Nov 03, 2013 5:05 pm 
Offline

Joined: Mon Mar 28, 2011 6:46 pm
Posts: 305
Location: Amsterdam
I think the frame will weight a bit more since my 54 weighted 1240...

You already mentioned the most easy places to save weight.
I would suggest the fork and saddle are also easy parts to save some weight.


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 7:53 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
Attachment:
Exustar-Keo.JPG
Exustar-Keo.JPG [ 82.79 KiB | Viewed 3597 times ]

Exustar Keo pedals


Top
 Profile  
 
PostPosted: Mon Nov 25, 2013 8:35 pm 
Offline
User avatar

Joined: Fri Feb 11, 2011 3:04 am
Posts: 2545
Location: Mississippi
Hollowgram cranks & Reynolds 32 tubulars would probably get you there pretty quickly. You can usually find both used for a reasonable price on eBay. If you insist on clinchers (as I do) the Soul wheels are a good bet.

_________________
Cannondale Evo

http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=130192


Top
 Profile  
 
PostPosted: Sat Nov 30, 2013 12:44 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
New parts are coming in:
Shifters (older model, but never used):
Attachment:
super-RecordShifter.jpg
super-RecordShifter.jpg [ 77.76 KiB | Viewed 3186 times ]

Planet-X brakes:
Attachment:
Planetx-breakes.jpg
Planetx-breakes.jpg [ 74 KiB | Viewed 3186 times ]


Top
 Profile  
 
PostPosted: Sat Dec 07, 2013 12:01 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
some more parts came in:
KCNC handlebar 44 cm (221 gr):
Attachment:
KCNC-handlebar.jpg
KCNC-handlebar.jpg [ 41.57 KiB | Viewed 2854 times ]


KCNC seatpost (182 gr):
Attachment:
KCNC-seatpost.jpg
KCNC-seatpost.jpg [ 39.28 KiB | Viewed 2854 times ]


Kalloy UNO stem (102 gr):
Attachment:
Kallay-Uno-100mm.jpg
Kallay-Uno-100mm.jpg [ 49.33 KiB | Viewed 2854 times ]


Top
 Profile  
 
PostPosted: Sat Dec 07, 2013 12:15 pm 
Offline
Administrator
User avatar

Joined: Mon Jun 02, 2003 8:17 am
Posts: 6053
Location: Drenthe, Holland
Hi Joop,

Great to see you lightening your bike. One thing to take into account is that a setback seatpost (the one that currently resides on your CAAD) will probably place you better over your bike and will also probably give you a better KOPS (Knee Over Pedal Spindle). A measurement to check if you are rightly positioned on your bike. Thus, the KCNC post that you showed might not be the perfect marriage for you and your bike.

One thing that could save you a lot of weight fast would by by swapping the fork. This fork probably has an alloy steerer.
The cranks might also be something to look at. Lighter BB30 cranks are available
As you might have seen (this is an open door) the wheels are a bit of pigs. those could be swapped out if you would like as well.

Good luck!

(btw, I guess you are from Holland. where do you live?)

_________________
Quote:
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'


Top
 Profile  
 
PostPosted: Sat Dec 07, 2013 12:49 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
Yes, I am from the Netherlands, Delft.
thanks, I will check on my KOPS-position
Wheels are on the list to be exchanged, I want clinchers, choosing between :
Soul S2.0 1300 gr (maybe not suited for everyday use?)
Soul S3.0 1550 gr ("more durable", according to Sean of Soul)

Campagnolo's might be good alternatives for the Soul S3.0 :
Neutron Ultra: 1490 gr
Zonda: 1550 gr
The neutrons are twice the price of the Zonda's and weight difference is relatively small.
I'm leaning towards a set of Zondas. (although I prefer the look of the Neutrons)

In the mean time, a set of planet X Ti-skewers (41 gr) came in, the original ones were 123 gr !
(80 gr saved for only 23,- euro)
Attachment:
PlanetX-skewers.jpg
PlanetX-skewers.jpg [ 60.48 KiB | Viewed 2838 times ]


Crank upgrades seem to be quite pricey, but maybe I can win something by replacing the chainwheels?


Top
 Profile  
 
PostPosted: Sat Dec 07, 2013 5:53 pm 
Offline
User avatar

Joined: Thu May 17, 2012 9:21 pm
Posts: 26
Location: The Netherlands, Amersfoort
Its coming along nicely, i wouldn't bother with just changing the chainrings Gram/Euro wise.

For cheap and easy weight savings you can try to find a cheap and worn selle Italia SLR saddle en then strip the leather deck and foam which gives you a saddle which weighs around 110 grams, i got 1 for 15 euro cheapest savings ever.

further tyres and tubes can save +100 grams easily with going to gp4000s and Vredestein latex innertubes and are transferrable to a new wheelset in the future.
doing those 2 things alone would give you a 260grams saving for around 80 to 90 euro's depending on how well you shop woud giva a 3 grams saved for every Euro and the tyres and tubes are a real upgrade in terms of comfort and rolling resistance without sacrificing puncture resistance.


Top
 Profile  
 
PostPosted: Sat Jan 18, 2014 6:02 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
Finally got my wheels, a hand-build set Kinlin XR270 rims and hope pro3 (24/28)
weight: 1530 g
Managed to install the campagnolo chain with a KMC missing link.
So today I could make the first tour my my campagnolo-CAAD!

Image


Attachments:
File comment: final build
CAAD10-01-18 13.45.12.jpg
CAAD10-01-18 13.45.12.jpg [ 140.67 KiB | Viewed 2321 times ]


Last edited by J00P on Tue Jan 21, 2014 1:43 pm, edited 1 time in total.
Top
 Profile  
 
PostPosted: Sat Jan 18, 2014 6:07 pm 
Offline

Joined: Sun Jun 17, 2007 6:56 pm
Posts: 732
J00P wrote:
Planet-X brakes:
Attachment:
Planetx-breakes.jpg


Nice build, I'm building a CAAD10 myself. Great frame. I think your scale might be off, because I have the Planet-X brakes as well, and mine came in at 212g. Others have weight close to that as well.

_________________
6.24kg CAAD10


Top
 Profile  
 
PostPosted: Sat Jan 18, 2014 6:45 pm 
Offline
User avatar

Joined: Sun Nov 03, 2013 4:11 pm
Posts: 47
I think there are 2 versions of the planetX brakes, CNC, spec 205g and a forged version: spec 225 g at half the price of the CNC brake.

Btw. I'm still looking for a lighter headset expander, at a reasonable price.
I want to replace that heavy c'dale aluminium weight. (50 g on my scale).

And i can cut a piece of my seatpost, to loose some more weight.


Top
 Profile  
 
PostPosted: Sat Jan 18, 2014 6:53 pm 
Offline

Joined: Sun Jun 17, 2007 6:56 pm
Posts: 732
Ah ok, you got the other brakes.

For the expander, I got an Extralite Ultrastar 2. Only 7g.

_________________
6.24kg CAAD10


Top
 Profile  
 
Posted: Sat Jan 18, 2014 6:53 pm 


Top
  
 
PostPosted: Mon Jan 20, 2014 4:37 am 
Offline

Joined: Mon Sep 17, 2012 10:53 pm
Posts: 502
Image


For the expanded plug just get the new cdale evo expander. You can get it at cannondaleexperts.com. its $32 I think. 12g. I have one in my Supersix and it works great.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ] 
Go to page 1, 2  Next


Who is online

Users browsing this forum: em3, mattiTWOROADS, Yahoo [Bot] and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Hyperon weight limit ??

in Everything wheels

wobbly

3

275

Sun Feb 15, 2015 10:22 pm

bm0p700f View the latest post

There are no new unread posts for this topic. My $2k limit WW Project! [6 of 29 Parts Assembled]

[ Go to page: 1, 2 ]

in Introduce Yourself / Gallery - Please use metric weights.

McGilli

28

2014

Sat Jul 04, 2015 3:41 am

ihs0yz View the latest post

There are no new unread posts for this topic. 3T Rigida Ltd Fork Weight Limit?

[ Go to page: 1, 2 ]

in Road

drainyoo

17

1140

Tue Aug 12, 2014 9:59 pm

drainyoo View the latest post

There are no new unread posts for this topic. UCI approve disc & looking at weight limit

[ Go to page: 1 ... 12, 13, 14 ]

in Road

NYCPrynne

202

8404

Tue May 05, 2015 4:43 pm

mangheesuk View the latest post

There are no new unread posts for this topic. UCI 65mm wheel limit mass start

in Road

IchDien

1

809

Fri Jan 23, 2015 5:53 pm

tharmor View the latest post


It is currently Sun Jul 05, 2015 10:38 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB