Where can I cut the most weight for the least money?

Who are you (no off-topic talk please)

Moderator: Moderator Team

Posts: 418
Joined: Sat Nov 10, 2007 9:51 pm

by lannes

FM066 frame

User avatar
Posts: 232
Joined: Sun Oct 17, 2010 8:45 pm
Location: London

by Dov

Drill as many small holes as possible in the frame and forks but avoid the stress areas like headtube
Felt F1 DA Di2
Cinelli Supercorsa
Cielo Classic Sportif
Concorde Shopper
Nagasawa Fixie Skid Machine
Cannondale CAAD 10 Track [custom]

Employee of Rapha

by Weenie

User avatar
in the industry
Posts: 394
Joined: Fri Jan 23, 2004 6:31 pm

by carbonLORD

IME working with EA manufacturers expect the Dengfu stuff to weigh more then suggested +10—20g unless they stop using air bladders in everything (which I doubt).

That said, looking at your list the only places I could see shedding a few grams are in the stem (there are sub 100g stems from Syntace as an example) the cranks, obvious, but the best bang for the buck will be in considering different tires then 400g Contis. However the Conti Racelight 28's supersonic tubes are actually 50g each, the regular racelights are 100g/ea, so saving 100g in rotational weight, with a lighter tire (like Vittoria's) would win you 150-200g savings where it matters the most (on the outside diameter) unless you just want a wall flower, then run some latex and start drilling and using ti bolts ;)

Seriously though, seems like a very nice, cost effective project you got there.

Enjoy it. Building out bikes is almost as fun as riding them.

Posts: 11
Joined: Wed Oct 02, 2013 5:31 pm

by dwmark2

carbonLORD: I included the weight for BOTH the Conti 4000s tires. They are 205 each. Same goes for the Conti Racelight 28's supersonic tubes (both weight 100g combined).

Ive been looking for a used 2012 SRAM Red groupset, but haven't found any on C-List. Anything I find on google is just too expensive. I will be checking out the planet x-brakes for sure.

Posts: 88
Joined: Thu Dec 13, 2012 4:24 am
Location: Sierra Foothills, California USA

by totoboa

Merek CF seatpost. Mine was 180g and cost $78 US I forget what the shipping was or if it was included.


Just re-read and saw your seatpost was included. :mrgreen:

User avatar
Posts: 402
Joined: Wed Oct 20, 2010 5:56 am

by kbbpll

Looks like you've got $350 within which to buy pedals and still lose ~400g (you're already 195g high and no pedals is another ~200g plus bartape and cables/housing?). Seems tough.

Posts: 11
Joined: Wed Oct 02, 2013 5:31 pm

by dwmark2

Update: I have better and more complete numbers now and am sitting pretty at 6029 grams (13.29 lbs) for $1942 (w/o shipping).

Screen shot 2013-10-14 at 9.52.53 AM.png

Notes: The price of the fork (ec90 slx) is after I resell the included fork. The brakes are the Planet-X CNC brakes, and also adjusted for price after I resell included ultegra brakes. The pedals are ones I already have laying around (the only non-new part) but pretty heavy.

Any ideas for how to get this thing even lighter for little money?
Your suggestions thus far have been helpful.

Post Reply
  • Similar Topics
    Last post