Ti roadie hot off the oven.
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Frame + seatpost came in at 1550g-ish. 6.45kg fully built, but another 300-400 grams could easily be shaved off the grouppo/stem/saddle/bar. Bar tape alone is over 100g, which is atrocious.
Enjoy.
Enjoy.
Last edited by elviento on Tue Sep 11, 2012 9:01 pm, edited 2 times in total.
Fast falcons: http://www.youtube.com/watch?v=j3mTPEuFcWk" onclick="window.open(this.href);return false;
www.falcobike.com
Facebook: falcobikeglobal
www.falcobike.com
Facebook: falcobikeglobal
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I agree!
Just had this sucker in the drawer for over a year now, so I figured what the heck.
Just had this sucker in the drawer for over a year now, so I figured what the heck.
pmr wrote:That bar tape also looks atrocious
Lovely bike, though!
Fast falcons: http://www.youtube.com/watch?v=j3mTPEuFcWk" onclick="window.open(this.href);return false;
www.falcobike.com
Facebook: falcobikeglobal
www.falcobike.com
Facebook: falcobikeglobal
-
- Posts: 541
- Joined: Mon May 22, 2006 11:34 am
- Location: Dubai, UAE
- Contact:
i like the bar tape strangely.
- jekyll man
- Posts: 1571
- Joined: Wed Apr 25, 2007 10:23 am
- Location: Pack filler
I've never really seen the point of Ti up until now; maybe i'm getting old
But i'm liking this lots!!
Is there an option to make the seatpost topper with more layback?
But i'm liking this lots!!
Is there an option to make the seatpost topper with more layback?
Official cafe stop tester
Thanks. Ti has its unique beauty and one doesn't have to be old to appreciate it. I got my first ti bike when I was 21 and I still have a weak spot for it.
Yes, you can get a topper with a bit more setback, although the geometry is already adjusted for no-setback. Seat angle is 73 degrees while most 52-53 frames have approx. 74 degrees head angle.
Re: rear shifting cable, yes it was deliberate and actually quite neat. Shifts like a dream.
Yes, you can get a topper with a bit more setback, although the geometry is already adjusted for no-setback. Seat angle is 73 degrees while most 52-53 frames have approx. 74 degrees head angle.
Re: rear shifting cable, yes it was deliberate and actually quite neat. Shifts like a dream.
Last edited by elviento on Tue Sep 11, 2012 3:32 pm, edited 2 times in total.
Fast falcons: http://www.youtube.com/watch?v=j3mTPEuFcWk" onclick="window.open(this.href);return false;
www.falcobike.com
Facebook: falcobikeglobal
www.falcobike.com
Facebook: falcobikeglobal
- masters324
- Posts: 185
- Joined: Mon Sep 20, 2010 3:41 am
- Location: Los Angeles, CA
- Contact:
Very beautiful looking bike! The logo and falcon head design look great too after all the hullabaloo about the old font...
Doesn't the RD cabling along the TT and then seat stay add another curve/bend where it comes off the stay? Do you feel the shifts are as quick as traditional routing along the DT and chain stay?
Edited to add: Do you feel there is an advantage (other than perhaps greater height adjustment?) of the long seat mast topper versus say a small topper or a long integrated post with a short/stubby seatpost (like on the BH G5 or Time RXRS)?
Doesn't the RD cabling along the TT and then seat stay add another curve/bend where it comes off the stay? Do you feel the shifts are as quick as traditional routing along the DT and chain stay?
Edited to add: Do you feel there is an advantage (other than perhaps greater height adjustment?) of the long seat mast topper versus say a small topper or a long integrated post with a short/stubby seatpost (like on the BH G5 or Time RXRS)?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com