Canyon Ultimate CF (again)

[Murphs]

Hi Guys,

Got my new (warranty replacement) frame built up today, I still have a few things to get dialed in but here it is:
Race trim


Training trim


I have another set of wheels (HED C2, Sapim Race, C-4hubs) that are somewhere in the middle but it's dark now.

Haven't weighed it, I'd guess about 7.2kg with the HED wheels

[djm]

Bigger pictures? The links are dead - 404 not found

[hansonator69]

How did you get it shipped to Aus?

[iscarrr]

Bigger pictures? The links are dead - 404 not found

Links just need the '/' taken off the end of them! Edit your post!

http://img851.imageshack.us/img851/8981/20120420160657.jpg

That's some vintage Zipps, by the decals anyway! And yes, how did you get the Canyon to Au?

[Murphs]

Sorry, I knew there was an easy answer! Picture links are fixed

I bought my original Canyon when they were selling them to Aus.

Yep, my race wheels were made in the 90's, but until I break them (i've tried), I'm gonna keep using them

[Murphs]

Basic Build list:

Frame: Canyon Ultimate CF
Fork: Canyon One One Four SLX
Shifters: SRAM RED
Brakes: SRAM RED
FD: SRAM Rival
RD: SRAM RED
Cables: Jagwire Racer
Crankset: Rotor 3D w/ Power2Max and aero 53/39 Q-rings.
Cages: eBay Carbon
Stem: Ritchey 110mm (think I need to go 120 or 130mm)
Bars: 3T Rotundo
Seatpost: Syntace P6 (I want a Canyon VCLS)
Saddle: Selle SMP Composit (stripped)
Training wheelset: Fulcrum Racing 7, Schwalbe Durano, 105 11/28 cassette
Racing clinchers: HED Belgium, Sapim Race 24/28, C-4 hubs, Veloflex Corsa, Ultegra 11/25
Racing Tubs: Retro Zipp 440, 20/28, Kenda Volare tubs, SRAM 11/23 cassette.

The bike is undefeated in bunch sprints so far...

This was the original thread: http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=59440&p=538577&hilit=canyon+ultimate+cf#p538577

I went from a 58 to a 56 when the frame was replaced

[Murphs]

So I needed a 130mm stem after all:


Plan is to sand the decals off the top and matte clear coat the whole thing