Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Tue Aug 30, 2016 8:29 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 21 posts ]  Go to page 1 2 Next
Author Message
 Post subject: CAAD10 Upgrade Project
PostPosted: Fri Apr 06, 2012 12:19 pm 
Offline

Joined: Fri Apr 06, 2012 12:01 am
Posts: 21
The last few months I was busy upgrading my Magnesium White CAAD10 Ultegra.

This is the upgrade list so far:

Campagnolo Shamal™ Ultra™ 2012 Wheels
Ritchey WCS Carbon Matrix 4-AXIS UD Stem
Sella Italia SLR Kit Carbonio Flow Saddle
C-Bear Ceramic Bearings (after the original Bottom Bracket was broken within 1 year -> thanks Cannondale !).
2 x Cannondale Carbon Cage EVO
2 x Schwalbe Ultremo ZX

Next on the (wish)list is a Ritchey WCS Superlogic evolution carbon bar to replace the heavy Cannondale C3 Bar (would save more than 100 grams).

The Weight came down significantly, but I want to push it further. So, my question is to you guys: what do you recommend ?

(yes, forget the saddle bag in the picture ;-) ).


Attachments:
caad10_ultegra.jpg
caad10_ultegra.jpg [ 34.6 KiB | Viewed 4435 times ]
Top
   
PostPosted: Fri Apr 06, 2012 3:08 pm 
Offline

Joined: Mon Mar 12, 2012 4:43 pm
Posts: 333
SLSI cranks :thumbup:


Top
   
 Post subject: CAAD10 Upgrade Project
PostPosted: Sat Apr 14, 2012 11:24 pm 
Offline

Joined: Tue Jun 28, 2011 1:35 am
Posts: 27
Here are some that worked great on my build and aren't too pricy

Thomson masterpiece seatpost. 142gr
SRAM red cassette 166gr
Kcnc skewers 45gr
Tune topcap and extralite expander (should save you 30plus grams)
Conti supersonic tubes - saves 40gr each over conventional tubes.


Top
   
PostPosted: Sun Apr 15, 2012 10:51 pm 
Offline

Joined: Mon Jan 21, 2008 10:36 pm
Posts: 827
headwind816 wrote:
SLSI cranks :thumbup:



Exactly. Not only eye candy but functional too.


Top
   
PostPosted: Mon Apr 16, 2012 2:38 am 
Offline

Joined: Sun Oct 17, 2010 1:44 pm
Posts: 82
look around for a used sisl. I got one for $340, albeit it had some wear but still. Its an awesome crank, super stiff and light.


Top
   
PostPosted: Wed Apr 18, 2012 9:37 pm 
Offline

Joined: Tue Jan 29, 2008 5:49 am
Posts: 265
Shamal Ultra on a Cannondale, is straight-up sexy. If you want BAMF....you need the Hollowgram Si or SiSL crankset:

Image

_________________
Due to the urging of all the ladies...I do NOT shave my legs!


Top
   
PostPosted: Wed Apr 18, 2012 9:48 pm 
Offline

Joined: Fri Apr 06, 2012 12:01 am
Posts: 21
Yeah Campa Shamal Ultra's are nice -> love them on my CAAD10 !


Top
   
PostPosted: Thu Apr 19, 2012 1:01 am 
Offline

Joined: Mon Oct 03, 2011 3:47 pm
Posts: 165
what is the cadence sensor? or whatever that thing is on the NDS chain stay?


Top
   
PostPosted: Thu Apr 19, 2012 1:02 am 
Offline

Joined: Fri Jun 03, 2011 9:12 pm
Posts: 503
Location: Riverside
looks like a Cateye sensor


Top
   
 Post subject: weight savings on CAAD10
PostPosted: Mon Nov 26, 2012 10:53 pm 
Offline

Joined: Fri Apr 06, 2012 12:01 am
Posts: 21
The last year I have been busy lowering the weight of my CAAD10.

I upgraded to the following parts:
Campagnolo Shamal Ultra 2012 Wheels (1425 grams)
Ritchey Superlogic II handlebar with 3T Pro Tape (188 + 61 grams)
Ritchey WCS Carbon Matrix 4-AXIS UD Stem (121 grams)
Sella Italia SLR Kit Carbonio Flow (115 grams)
two Cannondale Carbon Cages (40 grams total)
Dura-Ace 7901 chain (252 grams)
Dura Ace 7900 pedals (248 grams)
KCNC Chainring bolts (10 grams)
Ultremo ZX tires



What parts would you recommend to save more weight on the CAAD10 - and then especially looking at a USD/gram basis ? (yes and forget about the pump and the saddle bag in the picture ;-) ).

Thanks !


Attachments:
IMG-20121125-0001.jpg
IMG-20121125-0001.jpg [ 31.13 KiB | Viewed 2926 times ]
Top
   
PostPosted: Mon Nov 26, 2012 11:50 pm 
Offline

Joined: Wed Feb 16, 2011 7:46 pm
Posts: 187
looks at some of the builds in the into section - it will give you lots of ideas.

what crankset do you have? might start there. also consider the seatpost, brakes, cassette.


Top
   
PostPosted: Tue Nov 27, 2012 12:28 am 
Offline
User avatar

Joined: Fri May 12, 2006 2:11 pm
Posts: 1312
Location: Stockholm, Sweden
Change the crankset, it's heavy. Then group for a Force or Dura-ace for example. Can save weight everywhere but don't start with handlebar and stem that is pretty light.

Then it depends on your goal. A low profile tubular wheelset would save some weight to and be a nice upgrade

_________________
/jonas l
http://cerrol.wordpress.com (my cyclingblog)


Top
   
PostPosted: Tue Nov 27, 2012 12:57 am 
Offline

Joined: Mon Jun 28, 2010 6:39 pm
Posts: 16
Location: Portland, Oregon
loose the saddle bag, put the CO2 and the tube in your jersey pocket. A good 200grams savings! :-)


Top
   
PostPosted: Tue Nov 27, 2012 5:57 am 
Offline
User avatar

Joined: Tue Jul 03, 2012 6:20 pm
Posts: 141
Thomson Masterpiece
Lighter brakes
Shallow profile tubular wheels
Expander plug/top cap system
Gruppo
Crankset

That's where I'd look to shave weight on that steed...

_________________
I only train on days that end with "y".

Eli


Top
   
PostPosted: Tue Nov 27, 2012 7:38 pm 
Offline

Joined: Fri Apr 06, 2012 12:01 am
Posts: 21
Thanks !

By the way I did upgrade the topcap to a much lighter one.

The question for me what the most cost effective way is to reduce more weight (i.e. in terms of USD per gram).

The crankset I gave a thought of course, thinking about Dura Ace 7900 one, but in terms of weight reduction costs, it is like USD 2 per gram - which is not really tempting ...


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 21 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Caad10 anodised

in Road

Beancouter

0

571

Sat Apr 09, 2016 12:31 pm

Beancouter View the latest post

There are no new unread posts for this topic. Bearing size for Caad10

in Road

madsjkk

3

353

Thu Mar 31, 2016 2:06 pm

wpccrunner View the latest post

There are no new unread posts for this topic. 3T Rigida fork on CAAD10?

in Road

Canofale

0

205

Thu Jun 02, 2016 12:15 pm

Canofale View the latest post

There are no new unread posts for this topic. My CAAD10 to RAAD10 conversion

[ Go to page: 1 2 ]

in Introduce Yourself / Gallery - Please use metric weights.

dlcrep

21

5270

Wed Aug 24, 2016 1:23 am

Durisic View the latest post

There are no new unread posts for this topic. my 2015 caad10 ultegra di2

in Introduce Yourself / Gallery - Please use metric weights.

weptunus

4

979

Wed May 04, 2016 1:35 am

rheosibal View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: agentorange, Piotrini and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited