Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed Jul 27, 2016 10:51 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Tue Dec 10, 2002 5:01 am 
Offline

Joined: Tue Dec 10, 2002 3:50 am
Posts: 2
I have read that this bottom bracket uses the M12 thread crank bolts. The stock ones that come with the bottom bracket are pretty heavy. I have been wanting to replace them with something lighter but havent been able to find any. SRP doesnt make a M12 crank bolt.

Mabey I am totally wrong. Anyone have any luck replacing these with Ti or aluminum.


Thanks


Top
   
 Post subject: Beware!
PostPosted: Tue Dec 10, 2002 3:15 pm 
Offline

Joined: Tue Oct 22, 2002 7:49 pm
Posts: 1057
Location: The Netherlands - Europe
I have had a signature BB for ehh... one month. It turned out to be that the first production series had some faults. Mine had play from the beginning and after some 100 miles of riding it made horrible noises and jammed. On the non-drive side the bearings fell out and a lot of goo too, proving that the seals were not all that good...
I know that is not what you are asking for, but watch out! If you cannot install yours without play, send it back!

As for the bolts: FSA makes them. They came with my FSA crankset. Take care though: Tighten your cranks with the steel bolts all the way to the ISIS stop. If you cannot reach it, take the crank off, turn it 45 degrees and try again. Keep repeating this, until it reaches the stop. You run a great chance of destroying your alu bolts when doing this (I did...), which is why it makes sense to use the steel ones. Replace the steel bolts with alu ones once you have pulled the crank all the way up the spline.

JK


Top
   
 Post subject:
PostPosted: Wed Dec 11, 2002 4:42 am 
Offline

Joined: Tue Dec 10, 2002 3:50 am
Posts: 2
Thanks for the reply JK. I have had the bottom bracket for about 500 miles now with no trouble. I also heard they had some problems with their first generation BB's and it was in the bearing cups.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Need help on bottom bracket

in Road

poppiholla

3

321

Tue Jul 05, 2016 9:38 pm

poppiholla View the latest post

There are no new unread posts for this topic. Which GXP bottom bracket?

in Road

cnyn

8

567

Wed May 11, 2016 6:44 pm

topflightpro View the latest post

There are no new unread posts for this topic. What bottom bracket do I have?

in Road

G6612

3

323

Thu May 05, 2016 8:58 pm

Calnago View the latest post

There are no new unread posts for this topic. Attachment(s) THM BSA Bottom Bracket and tool

in For sale - Pictures are mandatory 22-3-13

coloclimber

0

108

Mon Apr 18, 2016 5:29 pm

coloclimber View the latest post

There are no new unread posts for this topic. C60 bottom bracket removal

in Road

markyboy

4

247

Sat Jul 16, 2016 6:56 am

ianSWBB View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited