wide flat bar

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

User avatar
Posts: 2206
Joined: Thu Mar 17, 2005 3:25 am
Location: Southern Indiana USA

by yourdaguy

Yea! I generally buy a 700 and end up whittling it down to 685-690. And I would not even consider buying anything under 690 but I mainly ride SS 29er.
For certain parts stiffer is more important than lighter.

Posts: 79
Joined: Fri Jul 06, 2007 4:46 pm
Location: Tallinn

by emike


Thanks a lot! New brand to me.

by Weenie

Posts: 13
Joined: Thu May 05, 2011 8:53 am

by Fattrucker


Just skimmed through this thread (tons of info , thanks :D )
I am looking for a 600+ mm wide bar in 31.8mm dia , fairly straight (would consider upto 11 degree bend) that could be cut to 600mm if wider.
I would like to keep the cost to under £100 if possible please .
Having searched and followed links till I am blue in the face I cannot find the right product . :noidea:
Annnd here's why .......... it needs to be WHITE , LIGHT(ish) and have a matching WHITE seatpost (also reasonably light) :|
Other details are the bike they are going on is matt black and anodised baby pink (OTH's project)
Glossy white would be ideal I think but large coloured graphics would clash with the pink .
The only things I can find are boat anchors <250gms or plastered in garish painted graphics .
I don't care about material - alloy , carbon , ti . Or where it's made (I'm not a brand or country of origin snob - most things branded or not are made in the far east anyway 8) )
She doesn't race or jump (relative novice) so max strength isn't *that* important .

Hope I have given enough background info for you guys to help me out here TIA


P.S. Hope this is ok in this thread and not requiring a new topic ? :oops:

Post Reply
  • Similar Topics
    Last post