Discuss light weight issues concerning mountain bikes & parts.
Moderator: Moderator Team
-
Esben
- Posts: 484
- Joined: Sun Oct 19, 2003 8:36 am
- Location: Denmark
by Esben on Mon Nov 15, 2004 2:03 pm
JK wrote::D ....... Just assume the most positive one! That goes for moderators too...
Just my .02 eurocents
Good point
I think it´s interesting to see modifired products - so keep on drilling and so.
By the way, what crank was that crank before drilling and cutting?
Esben
GAZ GAZ
-
JK
- Posts: 1057
- Joined: Tue Oct 22, 2002 7:49 pm
- Location: The Netherlands - Europe
by JK on Mon Nov 15, 2004 2:45 pm
Frankie - B wrote:Enough of this...Let's get back on topic.
Are these cranks new, or are they old and dremeled?
You guys are not really going to takes this serious right?
The cranks do not have any thread left to screw the crank puller in... If I see it right, it also does not have any thread left for the pedals. The maker of these beautiful cranks definetly had no plans of ever riding them.
-
NRSJC
- Posts: 37
- Joined: Sat Nov 06, 2004 5:48 pm
- Location: France
by NRSJC on Mon Nov 15, 2004 9:39 pm
I find these "new old" cranks ridiculous...
Work hard and be light to go fast !
I wait for the next marathon race.
-
Dave
- Posts: 105
- Joined: Mon Oct 04, 2004 5:29 am
by Dave on Tue Nov 16, 2004 2:11 am
Ty, when you said something was racist, or something about race, when you were referring to light-wods, what race were you referring to?