Setup 1x11 chainline

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
ninjanoir78
Posts: 188
Joined: Sat Jul 19, 2008 8:14 pm

by ninjanoir78

Hi, ive installed my new 32t oval ring, the chain has the good length, but on my 11th teeth, now my chain touch the chain stay (touch my guard) without my protector the chain doest not touch but the gap is about 3mm.

With my 2x11, the small gear was far more to the inside so the chain was inside the chainstay. Now its directly above.. And I can't really used spacers, cause the one up 32t have integrated chainrings threads with kind of small offset
Do you have an idea?
ImageImage

Envoyé de mon LG-D852 en utilisant Tapatalk
Last edited by ninjanoir78 on Mon Nov 28, 2016 1:47 am, edited 2 times in total.
Ninja

by Weenie


TheRookie
Posts: 910
Joined: Wed Jan 18, 2012 4:23 pm
Location: Midlands, United Kingdom

by TheRookie

What BB are you running, does it have spacers?

Otherwise it looks like you need to go for a round or bigger ring.
Impoverished weight weenie wanna-be!
Budget 26" HT build viewtopic.php?f=10&t=110956

jonasd
Posts: 30
Joined: Sun Nov 06, 2016 9:49 am

by jonasd

3mm of clearance may be enough to run a low-profile chainstay protector like the Lizard Skin CF one (or something similar):

https://www.rei.com/product/709016/liza ... -protector

ninjanoir78
Posts: 188
Joined: Sat Jul 19, 2008 8:14 pm

by ninjanoir78

TheRookie wrote:What BB are you running, does it have spacers?

Otherwise it looks like you need to go for a round or bigger ring.

Good question, this is what I see on rocky website :
RACE FACE PRESS FIT TEAM XC

Envoyé de mon LG-D852 en utilisant Tapatalk
Ninja

TheRookie
Posts: 910
Joined: Wed Jan 18, 2012 4:23 pm
Location: Midlands, United Kingdom

by TheRookie

As its a PF it almost certainly won't have a spacer, but worth a look.
Impoverished weight weenie wanna-be!
Budget 26" HT build viewtopic.php?f=10&t=110956

ninjanoir78
Posts: 188
Joined: Sat Jul 19, 2008 8:14 pm

by ninjanoir78

Impossible to play with my bb.. No spacer and with my ring and integrated /spacer/ threads I can't add spacers... I just need 2mm.
Look the ring... Any idea

Image

Envoyé de mon LG-D852 en utilisant Tapatalk
Ninja

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post