Cannondale FSi builds
Moderators: maxim809, Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 1426
- Joined: Sat Oct 10, 2009 7:13 am
- Location: 90039
@rupps5 he is running a Carbon-Ti X Monosync chainring in a 34.
- archicoolaurel
- Posts: 42
- Joined: Mon Apr 12, 2010 8:47 pm
- Location: Paris, France
- Contact:
numberSix wrote:close is ok as there's no mud-riding here; everything closes when it rains.
Not fitting, on the Lefty or the frame, is another story.
Borrowed a friend's custom race bike with RaRa 2.4's and was amazed how fast it rolled, while having tons of climbing and cornering traction. Not the most durable tires, but the benefits were noticeable.
Any tire clearance photos or measurements would be appreciated.
Here's a picture with a Maxxis Beaver 29x2.0 (47mm)
Blog Cannondale: https://www.facebook.com/BlogCannondale
Instagram: http://instagram.com/blog_cannondale
Wordpress: http://icannondale.wordpress.com/
Instagram: http://instagram.com/blog_cannondale
Wordpress: http://icannondale.wordpress.com/
Thank you! Usually the problem area is at the chain stay bottom bracket junction.
The issue is where the side knobs are. I know it's tough to get a proper photo there.
Sometimes it's just easier to improvise a feeler gauge.
Thanks for your efforts and I hope you're enjoying the new bike.
The issue is where the side knobs are. I know it's tough to get a proper photo there.
Sometimes it's just easier to improvise a feeler gauge.
Thanks for your efforts and I hope you're enjoying the new bike.
hjb1000 wrote:I'm loving the colour-themed saddle and grips. Is that Ergon saddle?
No, it's a new carbon Fabric
~GFeldy~
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
-
- Posts: 978
- Joined: Sat Nov 10, 2007 4:23 am
- Location: Poland/Toronto
- Contact:
You can spray it with plasti-dip.
Chris.
Chris.
Orbea Oiz - xxxx
MSC Koncept Carbon Di2 - 6955g
Leichtkraft Team Carbon - 6868g.
MSC Koncept Carbon Di2 - 6955g
Leichtkraft Team Carbon - 6868g.
This may be a dumb question, but for those that have the Carbon 1 and have converted it to a 1X system, did you have to get a specific 1X spider at all aka the one that comes on the Carbon 2 or the Carbon Team? Or any Spider that fits a BB30 would work for this. Again sorry if a dumb question, just not a complete tech and with the new offset they have on this bike I was curious as I plan to get the Carbon 1 and change it over to the Sram XX1 system. Thanks in advanced.
defresh00 wrote:This may be a dumb question, but for those that have the Carbon 1 and have converted it to a 1X system, did you have to get a specific 1X spider at all aka the one that comes on the Carbon 2 or the Carbon Team? Or any Spider that fits a BB30 would work for this. Again sorry if a dumb question, just not a complete tech and with the new offset they have on this bike I was curious as I plan to get the Carbon 1 and change it over to the Sram XX1 system. Thanks in advanced.
Yes. You'll need a spider or ring with a 6mm offset. I tried to run a direct mount wolf tooth but it was going to hit the chain stay so I went with the CarbonTi ring.
~GFeldy~
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
defresh00 wrote:This may be a dumb question, but for those that have the Carbon 1 and have converted it to a 1X system, did you have to get a specific 1X spider at all aka the one that comes on the Carbon 2 or the Carbon Team? Or any Spider that fits a BB30 would work for this. Again sorry if a dumb question, just not a complete tech and with the new offset they have on this bike I was curious as I plan to get the Carbon 1 and change it over to the Sram XX1 system. Thanks in advanced.
Yes. You'll need a spider or ring with a 6mm offset. I tried to run a direct mount wolf tooth but it was going to hit the chain stay so I went with the CarbonTi ring.
~GFeldy~
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
Here´s mine, ride it today for the first time. Although it was a short ride, i had very good impressions with it.
The Lefty fantastic as always.
You can check it here: https://vimeo.com/113781383
I´ve made an weightweenies upgrade.
The Lefty fantastic as always.
You can check it here: https://vimeo.com/113781383
I´ve made an weightweenies upgrade.
Vicpt wrote:Here´s mine, ride it today for the first time. Although it was a short ride, i had very good impressions with it.
The Lefty fantastic as always.
You can check it here: https://vimeo.com/113781383
I´ve made an weightweenies upgrade.
I like the Tune hubs!
~GFeldy~
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com