Moderators: maxim809, Moderator Team
-
Vicpt
- Posts: 29
- Joined: Sun Jun 08, 2014 3:06 pm
by Vicpt on Wed Mar 18, 2015 11:16 pm
si1ver wrote:LeDuke wrote:si1ver wrote:Ok more pictures here with shorter stem -25 80mm
Currently at 9540gram with stock Arch wheelset .
What size is that, si1ver?
Sent from my iPhone using Tapatalk
As mention by the_marsbar it is small . Mine weighted 9690 gram out of the box without pedals. I weighted the fork and it came in at 1630gram so its much heavier compare to hybrid .
Below are the things have done so far
-Remove tube and gone tubeless with RHC Flatfree sealant
-Swapped the Si crank with SiSL 2 SRM Spider
-Change from 180mm front to 160
-Magura MT6 to Formula C1 for now only because the Magura will not take 160 rotor upfront ( waiting for the formula R1R delivery )
-C2 carbon handle bar to FSA Kforce 685 133 gram at 650mm
-Standard saddle to Tune Speed needle 98gram
-Changed to Leonardi 80mm -25 stem gained 60gram
- Xpedo Ti Ti pedals 210gram
Currently the the bike wight 9540 gram,not exactly a ww but handle better on the twitchy trail compare to my F29 that is at 8420gram.
Hopping to bring the FSi s final weight close to 8500g with RHC Components Carbon wheelset , Formula R1R brakes and RaRa RoRo EVO Tires.
We will see .
Hi, about those wheels, do you mount them yourselves or do they come from RHC mounted to fit the F-Si demands?
Thanks
-
si1ver
- Shop Owner
- Posts: 278
- Joined: Tue Jan 10, 2006 3:53 am
-
Contact:
by si1ver on Mon Mar 23, 2015 5:08 pm
Hi i got them to dished the rear wheels as according to the Fsi specification which is easy for the hand build wheels I guess.
-
Vicpt
- Posts: 29
- Joined: Sun Jun 08, 2014 3:06 pm
-
stoney
- Posts: 474
- Joined: Wed Jun 08, 2011 11:26 am
-
Vicpt
- Posts: 29
- Joined: Sun Jun 08, 2014 3:06 pm
by Vicpt on Sun Apr 05, 2015 10:25 am
rupps5 wrote:New wheels and now it's at 19.9# without sealant.
Nice job.
Let us know about those wheels.
Did you build them yourself, what hubs you have?
-
si1ver
- Shop Owner
- Posts: 278
- Joined: Tue Jan 10, 2006 3:53 am
-
Contact:
by si1ver on Sun Apr 05, 2015 11:37 am
The wheels are finally ready
RHC carbon Custom
Carbon Ti SL hub rear with Cannondale hub front 32/32
SAPIM C X
Total weight 1380 with Tubeless Tape
Sent from my iPhone using Tapatalk
-
rupps5
- Posts: 22
- Joined: Thu Mar 20, 2014 10:10 pm
by rupps5 on Sun Apr 05, 2015 12:29 pm
Vicpt wrote:rupps5 wrote:New wheels and now it's at 19.9# without sealant.
Nice job.
Let us know about those wheels.
Did you build them yourself, what hubs you have?
They are stans valor wheels
-
Vicpt
- Posts: 29
- Joined: Sun Jun 08, 2014 3:06 pm
by Vicpt on Sun Apr 05, 2015 6:03 pm
Hi, i know they are Stans Valor, it happens that some time ago i asked a shop about those wheels for the F-Si, and they said were not available. So, i thought you got the rims and got them build for your bike.
Then i ordered my F-Si 2 with the TUNE wheels i have now.
-
rupps5
- Posts: 22
- Joined: Thu Mar 20, 2014 10:10 pm
by rupps5 on Sun Apr 05, 2015 10:14 pm
I had them on order for a couple of months because they were waiting for parts. stans built them. don't think they will sell those rims separately or I would have built them up long ago.
-
Vicpt
- Posts: 29
- Joined: Sun Jun 08, 2014 3:06 pm
by Vicpt on Mon Apr 06, 2015 8:18 pm
Just put it in place, Garbaruk Melon 34t, it works on the stand (i´ll try it soon outside):
Sorry for the bad photo, i´ll put a better one.
-
gfeldy
- Posts: 268
- Joined: Fri Aug 08, 2014 6:00 pm
by gfeldy on Mon Apr 13, 2015 3:10 pm
~GFeldy~
S Works Tarmac w/ EPS
S Works Epic HT Blurple tuned
Kitsbow
S Works Epic Blurple tuned - Sold
FS-i - Sold
Scalpel custom - Sold
EVO - Sold
-
Vicpt
- Posts: 29
- Joined: Sun Jun 08, 2014 3:06 pm
by Vicpt on Tue Apr 14, 2015 1:47 pm
Very nice, it must fly trough the trails!
The chainring looks like AbsoluteBlack.
I rode this weekend for the first time my Garbaruk Melon 34t, very impressed with this oval rings, the pedaling is "softer".