Ritchey superlogic post with specialized cabon railed saddle

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
rolfo
Posts: 50
Joined: Sun Apr 23, 2006 11:15 pm
Location: Netherlands

by rolfo

Hi Guys,

I want to go for a Ritchey superlogic carbon seatpost with a Specialized carbon railed Phenom saddle.

There is an adapter with Ritchey for a 7 x 9,6 mm rails, but the specialized is 7 x 9 mm...
Will this work or will the saddle slip? Has anyone tried this?

Thanks!

Best regards Rolf

mcwall1064
Posts: 2
Joined: Sun Sep 08, 2013 10:34 pm
Location: Sahuarita, AZ

by mcwall1064

Work perfectly without issue.

by Weenie


vfb
Posts: 58
Joined: Thu Oct 07, 2010 7:35 pm
Location: Denmark

by vfb

It works fine.

Has used the same setup for almost 2 years without any issues :-)
I ride for fun

rolfo
Posts: 50
Joined: Sun Apr 23, 2006 11:15 pm
Location: Netherlands

by rolfo

Thanks!

I'll give it a try!

fitty4
Posts: 350
Joined: Mon Jul 13, 2009 9:19 pm
Location: Denmark

by fitty4

Another one here with zero issues :)

socratease
Posts: 169
Joined: Thu Oct 13, 2011 5:25 pm

by socratease

I could never get my superlogic 1 bolt to stop slipping. It's been relegated to road duties. Ya'll no issuers have any tricks?

fitty4
Posts: 350
Joined: Mon Jul 13, 2009 9:19 pm
Location: Denmark

by fitty4

socratease wrote:I could never get my superlogic 1 bolt to stop slipping. It's been relegated to road duties. Ya'll no issuers have any tricks?


Other than tighten to 12Nm no tricks

by Weenie


CLEAR
Posts: 135
Joined: Tue Jul 24, 2012 2:20 pm

by CLEAR

At first I didn't believe I should go as high as 12nm. So what I did was using cloth rim tape (mine was veloux) around the rails, and carbon paste on the actual seatpost clamps. Works fine never moved.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post