Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Dec 05, 2016 7:46 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 16 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Wed Feb 12, 2014 4:09 pm 
Offline

Joined: Sun Feb 03, 2008 4:40 pm
Posts: 187
Location: Singapore
Hi All,

I have been trying to do some research on if I can install FibreLyte or similar carbon pulleys on a XX1 rear mech. Are there any of you who know if special carbon pulleys are required if I want to install them on a XX1 rear mech or whether they are compatible at all? Heard several places that the spacing of the XX1 pulleys is different that other SRAM rear mechs, which should make the use of standard carbon pulleys an issue.

Anyone knows?

Brgds
seicmic


Top
   
Posted: Wed Feb 12, 2014 4:09 pm 


Top
   
 
PostPosted: Wed Feb 12, 2014 10:38 pm 
Offline

Joined: Wed Feb 12, 2014 10:23 pm
Posts: 11
seismic wrote:
Hi All,

I have been trying to do some research on if I can install FibreLyte or similar carbon pulleys on a XX1 rear mech. Are there any of you who know if special carbon pulleys are required if I want to install them on a XX1 rear mech or whether they are compatible at all? Heard several places that the spacing of the XX1 pulleys is different that other SRAM rear mechs, which should make the use of standard carbon pulleys an issue.

Anyone knows?

Brgds
seicmic


Definitely different jockey wheels. XX1 is 12t, while X0 and other 10 speed is 11t.

Whether the size difference would affect performance, I don't know. You'd need to make sure the axle and bearing is compatible too.

It'd be interesting for someone to experiment...


Top
   
PostPosted: Fri Feb 14, 2014 12:02 am 
Offline

Joined: Fri May 02, 2008 5:39 pm
Posts: 1036
Location: Here, there and everywhere
Any 12T jockey wheel should be fine. Unless you live in a permanently dry place I wouldn't go for carbon. I am using 12T KCNC jockey wheels with a Fibre-Lyte inner mech plate on XX1 and it works perfectly. The other benefit of the Fibre Lyte cage is standard jockey bolts can be use rather than the two different sized ones required for the SRAM mech cage. It means a nice pair of KCNC jockey bolts can also be added to the tuning :D Only around 25g saved but all saved g's are useful :wink:


Top
   
PostPosted: Fri Feb 14, 2014 4:10 pm 
Offline
User avatar

Joined: Thu Oct 26, 2006 8:54 pm
Posts: 471
Location: USA
Good info here:
http://thebikeblog.de/2014/02/13/tuning ... chaltwerk/

_________________
Enjoying my Funk


Top
   
PostPosted: Fri Feb 14, 2014 9:00 pm 
Offline

Joined: Fri Apr 29, 2011 3:28 pm
Posts: 290
Location: portugal
Was going to post that same link dwaharvey :D


Top
   
PostPosted: Sun Feb 16, 2014 4:03 pm 
Offline

Joined: Fri Jan 17, 2003 6:58 am
Posts: 55
Location: Germany
Like this?

Image Image Image

Bye
Marcus


Top
   
PostPosted: Sun Feb 16, 2014 4:09 pm 
Offline

Joined: Sun Feb 03, 2008 4:40 pm
Posts: 187
Location: Singapore
mtbmarcus wrote:
Like this?

Image Image Image

Bye
Marcus


Yes, like that. Which pulleys are those, how many teeth and do they hold up in the mud?


Top
   
PostPosted: Sun Feb 16, 2014 5:50 pm 
Offline

Joined: Fri Jan 17, 2003 6:58 am
Posts: 55
Location: Germany
Hi,

they are new and selfmade. But not from me. A guy from light-bikes.de made them. They have 12 teeth and the same diameter of the originals. I think there will be no problem in the mud. Because of the bad weather here in Germany I did not try it yet.

Bye
Marcus


Top
   
PostPosted: Mon Feb 17, 2014 3:16 pm 
Offline

Joined: Sun Feb 03, 2008 4:40 pm
Posts: 187
Location: Singapore
mtbmarcus wrote:
Hi,

they are new and selfmade. But not from me. A guy from light-bikes.de made them. They have 12 teeth and the same diameter of the originals. I think there will be no problem in the mud. Because of the bad weather here in Germany I did not try it yet.

Bye
Marcus


Hi Marcus,

That is just awesome. Any chance he is selling to fellow weight weenies?


Top
   
PostPosted: Mon Feb 17, 2014 8:09 pm 
Offline

Joined: Fri May 02, 2008 5:39 pm
Posts: 1036
Location: Here, there and everywhere
Quote:
I think there will be no problem in the mud. Because of the bad weather here in Germany I did not try it yet.


One statement seems to contradict the other! Seismic, I would contact someone like Fibre Lyte who make great stuff but are very open and honest to see if they think carbon jockeys are suitable for mud. As far as I am aware manufacturers have always indicated the wear rate would be unacceptably high on a carbon jockey in mud but it would be interesting to double check. I personally wouldn't ever consider carbon jockeys to save 5g over the tried and tested KCNC with the conditions we have here in the UK


Top
   
PostPosted: Wed Feb 19, 2014 1:38 am 
Offline
in the industry
User avatar

Joined: Thu May 29, 2008 12:22 am
Posts: 605
Ask you asked….. :D

Carbon pulleys are fine in rain and light mud but I would never advise them in heavy conditions. If the mud is thick and mixes in with grit, that can get embedded between the chain and pulleys and at best cause excess wear and at worst try to split the laminate. That said, there are a number of alloy pulleys that are not so great in very muddy conditions. I still think that the best pulleys in those conditions are plastic based with brass plain bearings (bushes), but they're not very weenie.


Top
   
PostPosted: Tue Mar 11, 2014 4:34 pm 
Offline
User avatar

Joined: Sat Apr 13, 2013 4:00 am
Posts: 28
This guy on eBay http://stores.ebay.com/joechaimuirothshekbikeparts/ makes all kinds of Carbon Jockey wheels...his are full carbon, not sandwiched? I'm pretty sure he will custom make them for you as well.

I think mine weighed about 8 grams for the pair, and I've been using them for about a year with no problems.

Image

_________________
A Pile of Tile
Artistic Tile Inlay


http://youtu.be/9SctEhBljqY

01 Gary Fisher Sugar 1, 98 Schwinn Mesa GSX, 04 Ventana El Chamuco, 07 Navara Bliss


Top
   
PostPosted: Tue Mar 11, 2014 10:29 pm 
Offline

Joined: Wed Nov 01, 2006 4:55 am
Posts: 686
Location: Vancouver, British Columbia, Canada
Apileoftile wrote:
This guy on eBay http://stores.ebay.com/joechaimuirothshekbikeparts/ makes all kinds of Carbon Jockey wheels...his are full carbon, not sandwiched?


I have used his pulleys in the past, and had a few issues with the carbon pulley moving on the bearing because the glue joint let go making rear shifting inconsistant. Has he resolved these issue?


Top
   
PostPosted: Tue Mar 11, 2014 10:41 pm 
Offline
User avatar

Joined: Sat Apr 13, 2013 4:00 am
Posts: 28
? I wouldn't know. I have had zero issues with mine it consistently shifts perfectly....but if I guess if I start having problems I will know where to look.

_________________
A Pile of Tile
Artistic Tile Inlay


http://youtu.be/9SctEhBljqY

01 Gary Fisher Sugar 1, 98 Schwinn Mesa GSX, 04 Ventana El Chamuco, 07 Navara Bliss


Top
   
PostPosted: Sat Mar 22, 2014 12:03 pm 
Offline

Joined: Wed Jan 12, 2005 6:29 pm
Posts: 209
Location: Oslo, Norway
I just put a pair of Extralite 9g pullies on my XX1, and it shifts just fine. The Extralite pullies use dual bearings to keep the pulley as rigid as possible.

Image


Top
   
Posted: Sat Mar 22, 2014 12:03 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 16 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Switching rear derailleur pulleys from 11t to 13t - is it possible?

in Road

alcatraz

1

285

Wed Oct 12, 2016 8:03 am

Marin View the latest post

There are no new unread posts for this topic. Rear mech hanger chain rub

in Road

tinchy

5

244

Thu Jun 30, 2016 5:25 pm

tinchy View the latest post

There are no new unread posts for this topic. Super Record EPS Rear Mech - 11 X 32 Cassette?

in Road

peacefulloflove

5

426

Sun Feb 21, 2016 6:23 pm

jrobart View the latest post

There are no new unread posts for this topic. Dura Ace and Ultegra rear Mech interchangeablity

in Road

weastman

1

274

Tue May 24, 2016 11:57 am

junchen View the latest post

There are no new unread posts for this topic. Dura Ace 7700 rear mech problems

in Road

Penthousepete

3

204

Tue Aug 09, 2016 9:21 pm

Asteroid View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: ms6073 and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited