Mads Kock wrote:crazy - did Scott have problems with the 2013 frames since the reinforced it that much?
They must have. Also they went from 135mm rear hub to the 142mm.
I bought a 2012 Scale 29er in Medium. I believe it was 980g for the frame. Right from the beginning I had problems. The rear wheel would not stay put in the dropouts. No matter how tight I clamped it. Different wheel, different skewer does not make a difference.
Scott replaced the frame after about 2-3 months of correspondence. The new frame was a 2013. Same problem
Eventually I will by another frame and it will not be another Scott Scale
Hopefully with the 142mm spacing and probably beefed up rear triangle they have fixed the issue.