Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Thu Sep 29, 2016 2:42 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue Jun 11, 2013 3:05 pm 
Offline
User avatar

Joined: Sat Jan 03, 2009 9:43 pm
Posts: 3036
Location: Canada
my bike shifts good on my cheap sram 10spd cassette but shifts badly when on the bigger cog of my XO cassette.

The XO cassette is brand new, the cheap one has a bit of mielage on it but not much, and the chain was replaced earlier this season, not long ago too. I changed the cable and housing last week but the problem persists on the XO cassette.

Any idea what it could be? I will look at the B-screw setting just because I ma not sure it's well set and will look at the pulley wear. Will any 11T pulley do the trick, like this one http://www.chainreactioncycles.com/Mode ... elID=49729

thanks


Top
   
Posted: Tue Jun 11, 2013 3:05 pm 


Top
   
 
PostPosted: Tue Jun 11, 2013 9:43 pm 
Offline

Joined: Wed Jan 18, 2012 4:23 pm
Posts: 755
Location: Midlands, United Kingdom
Is the largest ring the same size on both cassettes?

Did you re-index at all when you changed cassettes?

_________________
Impoverished weight weenie wanna-be!
Budget 26" HT build viewtopic.php?f=10&t=110956


Top
   
PostPosted: Tue Jun 11, 2013 9:48 pm 
Offline
User avatar

Joined: Sat Jan 03, 2009 9:43 pm
Posts: 3036
Location: Canada
yeah ring is same size. I tried to index it to the new cassette when I changed cable and housing but it wasnt succesful, then all was good when going back to my older cassette. There is a clicking noise when going onto the 2nd or 3rd innermost cog on the new cassette.


Top
   
PostPosted: Wed Jun 12, 2013 5:39 am 
Offline

Joined: Mon Jul 26, 2004 1:06 pm
Posts: 978
Location: Melbourne, Australia
obviously ensure the b-tension is set at 12mm from the bottom of the big cog when the bike is in the easiest gear.

the x.o cassette tends to sit a little more inboard than their other cassettes (fractions of a millimetre). do you need to screw out the low limit screw a little? if this is the case then you probably do need a bit more cable tension compared to your old cassette as well.

if that doesn't work start from the beginning and check your derailleur hanger. i've found that x.o and x.x cassettes are more sensitive than cheaper cassettes.

_________________
Grover's Grumblings
Grover's Garage


Top
   
PostPosted: Wed Jun 12, 2013 11:20 am 
Offline
User avatar

Joined: Sat Jan 03, 2009 9:43 pm
Posts: 3036
Location: Canada
thanks thats helpful grover!

I have played with the L screw yesterday as the derailleur was sitting a bit too much toward the spokes. The cassette now shifts better, the only clicking noise I can hear now is when on the small ring and on the 36T cog at the back, think I can live with that clicking noise for a while...


Top
   
PostPosted: Wed Jun 12, 2013 7:10 pm 
Offline

Joined: Fri May 30, 2008 11:03 am
Posts: 86
devinci wrote:
thanks thats helpful grover!

I have played with the L screw yesterday as the derailleur was sitting a bit too much toward the spokes. The cassette now shifts better, the only clicking noise I can hear now is when on the small ring and on the 36T cog at the back, think I can live with that clicking noise for a while...


Have you checked the front derailleur? If the cassette sits more inboard clicking noise might come from chain hitting your FD.


Top
   
PostPosted: Thu Jun 13, 2013 1:08 am 
Offline
User avatar

Joined: Sat Jan 03, 2009 9:43 pm
Posts: 3036
Location: Canada
definitly not the case


Top
   
Posted: Thu Jun 13, 2013 1:08 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Wheel and Shifting

in Road

ipenguinking

7

297

Sat Apr 23, 2016 1:11 am

fh8425 View the latest post

There are no new unread posts for this topic. Shifting woes

in Road

Gregorio

8

678

Wed Jun 15, 2016 4:48 pm

audiophilitis View the latest post

There are no new unread posts for this topic. EPS V2 shifting issues

in Road

tadrums

10

529

Sun Apr 03, 2016 5:49 am

tadrums View the latest post

There are no new unread posts for this topic. Trek Madone 9 - mech shifting

in Road

mbrider

1

323

Tue May 31, 2016 5:24 pm

nickf View the latest post

There are no new unread posts for this topic. Fibre Lyte chainring bad shifting

[ Go to page: 1 2 ]

in Road

KCookie

17

869

Sun Jul 31, 2016 6:04 am

KCookie View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited