HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Specialized 2x9 setup?
PostPosted: Sun Mar 10, 2013 8:49 am 
Offline

Joined: Tue Jan 18, 2011 4:25 pm
Posts: 6
Hey folks, been sifting thru the forum in attempts to gleen info for the following:

How does one make a 2011 Specialized MTB crankset fit a 68mm shell as listed here:

viewtopic.php?f=1&t=91856&start=15

Thx!


Top
 Profile  
 
 Post subject: Specialized 2x9 setup?
Posted: Sun Mar 10, 2013 8:49 am 


Top
  
 
PostPosted: Sun Mar 10, 2013 5:03 pm 
Offline

Joined: Mon Mar 02, 2009 4:50 am
Posts: 689
IIRC, you just need a bottom bracket that works with a 30mm spindle.
I believe e.13, rotor, and Zipp all make ones that should work.
http://www.rotorbikeusa.com/products/bs ... acket.html
http://www.amazon.com/gp/aw/d/B0016K1TEO
http://www.wiggle.com/ethirteen-xc-exte ... m-bracket/


Top
 Profile  
 
PostPosted: Sun Mar 10, 2013 5:16 pm 
Offline

Joined: Tue Jan 18, 2011 4:25 pm
Posts: 6
Thanks Colin!

I was thinking the same, either Zipp/eThirteen-Hive/WheelsMfg press fit 30 cups (PF30).

But I was wondering about spindle length of the crankset?

Don't know if BB30 cranksets have a longer spindle since they are designed for BB30 frames.

I guess I may have to shim the cups before installing the crankarms but that messes up the Q-factor
and chainline?

Right idea or am I totally off?


Top
 Profile  
 
PostPosted: Sun Mar 10, 2013 5:35 pm 
Offline

Joined: Mon Mar 02, 2009 4:50 am
Posts: 689
Again, IIRC, the Specialized mountain bike cranks aren't true BB30, and actually have a length of close to 90mm (89.5mm?), which is the same, or very close, to a 68mm BSA BB with any of those cups installed. From what I've seen, you shouldn't even need spacers.


Top
 Profile  
 
PostPosted: Mon Mar 11, 2013 4:25 am 
Offline

Joined: Wed Feb 02, 2011 3:48 am
Posts: 1038
xc71 wrote:
This will not work on 73mm BB, only 68m BB. I had to remove all 3 of the 2.5mm spacers, so the cups go against the frame. The only external spacer I used was the wave washer that comes with the cranks on the non drive side - this worked perfect. From my XTR 970 cranks this set up gave me a narrower Q-Factor and 2mm less chain line, whiched I wanted as I'm running 2x9.
My Hive cups are 95 grams. I just saw Clav. has threaded cups for a 68mm BB and 30mm axle that are 72 grams & I'm 95% sure these would work on my set up.Probably try these when I need new BB bearings.

This post from the thread you linked sums it up pretty well.


Top
 Profile  
 
PostPosted: Mon Mar 11, 2013 4:34 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1969
Location: NoVA/DC
The mountain cranks were originally designed for an 84.5mm bb shell, which they had on some bikes in 2009/2010...
That original layout still had a couple spacers occupying spindle real estate. You basically need 86mm to do it... It's probably doable, but it may be cutting it close.
let us know how it turns out.


Top
 Profile  
 
PostPosted: Tue Mar 12, 2013 12:41 am 
Offline

Joined: Mon Dec 26, 2005 12:44 pm
Posts: 243
Location: Sydney, Australia
I only works with a 68 mm BSA BB.

I used the E13 BB and it worked fine. No spacers and a single wave washer.

As noted the Specialized OSBB MTB cranks are not true BB30 as they are wider.


Top
 Profile  
 
Posted: Tue Mar 12, 2013 12:41 am 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. My R5 with P-R setup & my Z5i

[ Go to page: 1, 2 ]

in Introduce Yourself / Gallery - Please use metric weights.

MARLON

15

1671

Sun Apr 27, 2014 2:02 pm

liam7020 View the latest post

There are no new unread posts for this topic. tubeless setup

in Cyclocross / Touring

weenie

10

658

Wed Feb 19, 2014 8:13 am

Gunjira View the latest post

There are no new unread posts for this topic. WW Touring setup

in Cyclocross / Touring

jordo99

8

420

Tue Jul 29, 2014 3:39 pm

jordo99 View the latest post

There are no new unread posts for this topic. Amazing brake setup

[ Go to page: 1, 2 ]

in Road

tantra

21

1423

Wed Oct 01, 2014 4:41 am

spdntrxi View the latest post

There are no new unread posts for this topic. 9070 Di2 rd setup question

in Road

tantra

13

747

Sat Sep 27, 2014 3:30 am

thisisatest View the latest post


It is currently Tue Oct 21, 2014 11:28 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB