HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Aug 12, 2013 9:08 pm 
Offline

Joined: Sat Apr 03, 2010 11:05 pm
Posts: 326
I need to replace my battery. This unit is a little different than the ones I've searched out that members have replaced. Any one know how to get the cover off? Do I need to unscrew the lock ring on the crank spindle? Any help is much appreciated.


Top
 Profile  
 
PostPosted: Tue Aug 13, 2013 4:10 am 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1524
Location: Houston, Texas
Take a look at DIY SRM Battery Change. The plastic torque cover has a slight lip which is probably obscured by the inner and/or middle chain rings. Once removed, you should see the lip and using a good source of light and possibly a magnifying glass, you will see there very small indentations around the circumference of the plastic torque ring. The torque ring is press fit onto the inner lip of the powermeter and I have used a very sharp shop knife but you can also use a jewelers screwdriver to carefully - plastic is very thin and easily deforms - pry the cover off.

_________________
Michael - The Anaerobic Threshold is neither...


Top
 Profile  
 
Posted: Tue Aug 13, 2013 4:10 am 


Top
  
 
PostPosted: Tue Aug 13, 2013 5:41 pm 
Offline

Joined: Sat Apr 03, 2010 11:05 pm
Posts: 326
ms6073 wrote:
Take a look at DIY SRM Battery Change. The plastic torque cover has a slight lip which is probably obscured by the inner and/or middle chain rings. Once removed, you should see the lip and using a good source of light and possibly a magnifying glass, you will see there very small indentations around the circumference of the plastic torque ring. The torque ring is press fit onto the inner lip of the powermeter and I have used a very sharp shop knife but you can also use a jewelers screwdriver to carefully - plastic is very thin and easily deforms - pry the cover off.



Thanks! I got the cover off and will replace the battery. BTW, I ended up using a surgical scapel #10 blade b/c the fit was so tight. It's a good design to keep water out. Thanks again for your invaluable help. :D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Old K Force Light and Ultegra dì 6870.

in Road

Thanh

3

230

Thu Jun 26, 2014 8:35 am

Omiar View the latest post

There are no new unread posts for this topic. FSA K Force light 386evo or bbright crank weight

in Road

prebsy

0

123

Tue Aug 12, 2014 3:17 pm

prebsy View the latest post

There are no new unread posts for this topic. Shimergo? Tiagra triple 10 speed & Campy veloce ergo levers

in Road

onesweetkitty

4

625

Sat Sep 28, 2013 3:50 pm

DMF View the latest post

There are no new unread posts for this topic. Cervelo S5 internal battery

in Road

cajer

8

474

Sat Aug 09, 2014 12:38 pm

rmerka View the latest post

There are no new unread posts for this topic. Ui2 battery seatpost advice

in Road

KOGAN

11

1198

Wed Nov 20, 2013 5:33 am

drmutley View the latest post


It is currently Mon Sep 01, 2014 8:49 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB