Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 12:08 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed
- Tapatalk connection is currently broken

Those bugs will be fixed ASAP (next few days) as they are unfortunately more serious than expected.

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Sat Jun 16, 2012 10:13 am 
Offline

Joined: Sun Nov 13, 2011 10:37 am
Posts: 21
After having communication issues trying to order a smud 30.9mm seatpost for my 29er epic i then ordered a Tune carbon one. I use the old model specialized phenom saddles with Ti rails but when torquing up the bolts to the recommended levels I can move the saddle slightly by twisting it side to side. My new ultimate worked fine on my other bike with this saddle... Anyone else suffered similar issues ?


Top
   
PostPosted: Mon Jun 18, 2012 5:38 am 
Offline

Joined: Wed Apr 08, 2009 5:23 am
Posts: 334
Location: Port Angeles, WA
In reality, saddles and seatposts are not always compatible. The spacings of saddle rails and seatpost clamps are often 1 or 2mm different. And the diameter of saddle rails does not always fit well in seatpost clamps. Plus, both sides of seatpost clamps are not always parallel - the front & rear yokes themselves can be different!

Maybe you can find someone with identical parts to be able to tell if this is a unique issue or whether your two parts just don't fit. Either way, sounds like you have to go to another seatpost. Just sayin.


Top
   
PostPosted: Wed Jun 20, 2012 6:46 am 
Offline

Joined: Sun Nov 13, 2011 10:37 am
Posts: 21
Have now tried another brand of seat and it does fit better so it maybe its the small tolerances previously mentioned. However the yokes still dont sit entirely flat on the rails due to the seat angle on the Epic 29 frame so i have ordered a different type of yoke similar to the MCFK ones to hopefully address it completely. Another option would be to maybe file a small angle where the yokes sit on the rails but i dont really feel comfortable doing that..


Top
   
PostPosted: Wed Jun 20, 2012 9:14 am 
Offline

Joined: Sat Apr 26, 2008 10:44 pm
Posts: 143
Location: Holland/Belgium
Go with MACK, PoP or AX yokes because they work at any angle and so are more carbon rail friendly.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited