Currently have BB30 X0 crankset with 26-39 rings and XX 26-39 FD low direct mount S3 type
Would like to change the rings to 24-38 combo
Is it necessary to replace also FD or my present will work fine with new rings?
24-38 chainrings with 26-39 FD
Moderator: Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
Lars K. P.
- Posts: 74
- Joined: Sat Mar 14, 2009 9:08 am
- Location: Denmark
Can you fit 24 rings on a BB30 X.0 crankset?
I have searched and found that few suppliers manufacture 25 rings for X.0 but I have not found a 24 solution!
I have searched and found that few suppliers manufacture 25 rings for X.0 but I have not found a 24 solution!
andrey wrote:Currently have BB30 X0 crankset with 26-39 rings and XX 26-39 FD low direct mount S3 type
Would like to change the rings to 24-38 combo
Is it necessary to replace also FD or my present will work fine with new rings?
Lars K. P.
Lars K. P. wrote:Can you fit 24 rings on a BB30 X.0 crankset?
I have searched and found that few suppliers manufacture 25 rings for X.0 but I have not found a 24 solution!
Xmmm... I planed use this one: http://www.bike-components.de/products/ ... ider-.html
But now see, that it's for GPX spindle only... Pity
-
the_marsbar
- Posts: 1051
- Joined: Wed May 13, 2009 5:23 pm
- Location: Denmark
- Contact:
Should be possible. I am running S2210 cranks with 24/38 rings... I don't know where to get just the chainrings though...
I've googled some forums and saw, that quite a lot companies (not SRAM, but others do) produce special spiders for BB30 X0/X9 cranks. So, to make a convention is not a problem and I would like return to my question: Is it necessary to replace 26-39 FD or it will work fine with new 24-38 rings? Have anyone tried this combo?
